2950 hard drive temperatures

[Gavin Sandie]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello,

I've got a PE 2950 running Debian Etch that I've installed omsa onto.
It's all working great and I'm quite happy with it.

I've been trying to get the temperatures of the individual drives in the
machine. It's got 6 drives in it, the omsa storage section shows the
drives and shows various information about them, but doesn't have any
temperatures. I've also tried to get this information using the MegaCLI
tool but it doesn't seem to have it.

Is it possible to get this information from the drives? I've had a look
at using hddtemp but it wants to get it's information from the SMART
information on the drive. Only I don't seem to be able to get at this
information.

I've searched back through the archives but I can't see any answers to
this issue. I've included some information about the server, if anyone
has any pointers on how to do this it would be great:

kernel - 2.6.18

megasas: 00.00.03.01 Sun May 14 22:49:52 PDT 2006
megasas: 0x1028:0x0015:0x1028:0x1f03: bus 2:slot 14:func 0


scsi0 : LSI Logic SAS based MegaRAID driver
  Vendor: MAXTOR    Model: ATLAS10K5_147SAS  Rev: BP00
  Type:   Direct-Access                      ANSI SCSI revision: 05


MegaCLI SAS RAID Management Tool  Ver 1.01.24 January 17, 2007


- --
Gavin Sandie
Systems Administrator
Picsel Technologies Ltd.
www.picsel.com
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFGlLvZq1HTllts+iERAsfQAJ90oslJItViJ4XumGmMYmofIQWyXwCfTZQr
HYYbZcVKlw/5LtMkxSiLh1o=
=f1Mr
-----END PGP SIGNATURE-----