create single partition for 3.5 TB

[Arivazhagendran.S]

Dear All
              
              I have one issue in Poweredge 2950 with Linux EL4-32 bit & EL5-64bit. I can’t make a part above 1.4TB I am used commands fdisk and parted also. Place do the need full.
   
  Hardware Details: 
  Poweredge 2950
  SAS PERC 5/i Controller
  750GB HDD * 6
   
  Requirement:  configure RAID5 750GB*6=3.5XX TB (don’t spite two logical disk in RAID configuration)
                          
  We are used 40GB for OS balance space create single partition for 3.5TB      
   
  /dev/sda                      ext3
  #fdisk –l command not able to more then 1.4TB 
  Parted 
  #parted print /dev/sda (Asking massage lose all data ignore /cancel)
  Ignore it’s removed all OS partition (/, /boot, /swap, etc)
   
  Reg
  Arivu

 Send free SMS to your Friends on Mobile from your Yahoo! Messenger. Download Now! http://messenger.yahoo.com/download.php
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20070706/485b607e/attachment.htm