No storage info from OMSA 5.1 on Debian Etch

[Patrick_Boyd at Dell.com]

Can you give me your version magic from aacraid module?

strings aacraid.ko | grep vermagic

Thanks,
Patrick Boyd

-----Original Message-----
From: Nuno Jordão [mailto:njordao at tp.telepac.pt] 
Sent: Monday, January 22, 2007 6:53 PM
To: Boyd, Patrick; linux-poweredge-Lists
Subject: RE: No storage info from OMSA 5.1 on Debian Etch

It appears that the driver from the debian 4.0RC1 kernel does not create those entries:

# uname -r
2.6.18-3-686
# lsmod | grep aacraid
aacraid                51424  4
scsi_mod              124168  2 sd_mod,aacraid
# ls /proc/scsi/aacraid
ls: /proc/scsi/aacraid: No such file or directory # ls /dev/afa*
ls: /dev/afa*: No such file or directory

Nuno Jordão

-----Original Message-----
From: Patrick_Boyd at Dell.com [mailto:Patrick_Boyd at Dell.com]
Sent: terça-feira, 23 de Janeiro de 2007 0:39
To: Nuno Jordão; a.faglia at farmol.it; linux-poweredge at lists.us.dell.com
Subject: RE: No storage info from OMSA 5.1 on Debian Etch

The only cards that require special modules are the PERC 4/IM, SAS 5/iR, SAS 5/i, SAS 5/E, and some non-RAID cards. The other PERC cards use the RAID interfaces (either aacraid or megaraid/megaraid-sas) for management.

If your having issues with OMSA seeing your PERC 3/Di look for
/proc/scsi/aacraid/* and /dev/afa* these are the interfaces to the aacraid module that OMSA uses.

-----Original Message-----
From: Nuno Jordão [mailto:njordao at tp.telepac.pt]
Sent: Monday, January 22, 2007 6:21 PM
To: Boyd, Patrick; a.faglia at farmol.it; linux-poweredge-Lists
Subject: RE: No storage info from OMSA 5.1 on Debian Etch


Hello,

Are there any required modules to monitor a PowerEdge 2650 Adaptec based
PERC 3Di like those for the LSI based cards? 
Still not working on those... :(

It would be nice to have a list of all required/available modules for each
model of Perc Raid Adapters... :)

Thank You.

Nuno Jordão

-----Original Message-----
From: linux-poweredge-bounces at dell.com
[mailto:linux-poweredge-bounces at dell.com] On Behalf Of Patrick_Boyd at dell.com
Sent: segunda-feira, 22 de Janeiro de 2007 19:02
To: a.faglia at farmol.it; linux-poweredge at lists.us.dell.com
Subject: RE: No storage info from OMSA 5.1 on Debian Etch

There are specific version of the mptlinux (aka mptscsi, aka mptsas) driver
needed in addition to the mptctl driver. First I'd make sure that these
modules are loaded and if they are and you still have problems compare your
versions to the drivers listed on support.dell.com. 

-----Original Message-----
From: linux-poweredge-bounces at dell.com
[mailto:linux-poweredge-bounces at dell.com] On Behalf Of Alessandro FAGLIA
Sent: Saturday, January 20, 2007 2:05 AM
To: linux-poweredge-Lists
Subject: No storage info from OMSA 5.1 on Debian Etch

Dear list,
I happily managed to have OMSA 5.1 (grabbed from
ftp://ftp.sara.nl/pub/sara-omsa) working on Debian testing (aka Etch).
The server is a PE 840 with two 160GB SATA disks attached to a SAS5iR
controller in a RAID0 configuration. Kernel has been properly compiled from
a vanilla 2.6.19.
I can get info for almost all subsystem, and also web interface is working
on port 1311 (many thanks to Sander Keemink for his precious work).

The only problem I have is that for the storage subsystem I am not able to
get any information. That is:
myserver:/opt/dell/srvadmin/oma/bin# ./omreport storage controller No
controllers found

Probably I am missing a kernel module or something else.
I would be grateful to anybody giving me some clue to fix this last issue.


Regards.
Alessandro

_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com
http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq

_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com
http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq