Debian omreport problems

[Patrick_Boyd at Dell.com]

Ok looks like you have the PERC 4/SC in non-RAID mode. Are you using
software RAID?

If the above is true then what I stated about sysfs being different
would cause OMSA non-RAID functionality to not operate as expected. 

-----Original Message-----
From: linux-poweredge-bounces at dell.com
[mailto:linux-poweredge-bounces at dell.com] On Behalf Of Marcus Williams
Sent: Tuesday, January 16, 2007 3:19 AM
To: linux-poweredge-Lists
Subject: Re: Debian omreport problems

On 15/01/2007 Patrick_Boyd at Dell.com wrote:
> Are there any other controllers listed by `omreport storage
controller`?
> Or is 0 it? 

It only reports the LSI card:

stampy:~# omreport storage controller
 Controller  LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual
Ultra320 SCSI (rev 8). (Embedded)

Controllers
ID                                : 0
Status                            : Ok
Name                              : LSI Logic / Symbios Logic 53c1030
PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 8).
Slot ID                           : Embedded
State                             : Ready
Firmware Version                  : Not Applicable
Minimum Required Firmware Version : Not Applicable
Driver Version                    : Not Applicable
Minimum Required Driver Version   : Not Applicable
Number of Connectors              : 1
Rebuild Rate                      : Not Applicable
BGI Rate                          : Not Applicable
Check Consistency Rate            : Not Applicable
Reconstruct Rate                  : Not Applicable
Alarm State                       : Not Applicable
Cluster Mode                      : Not Applicable
SCSI Initiator ID                 : Not Applicable
Cache Memory Size                 : Not Applicable
Patrol Read Mode                  : Not Applicable
Patrol Read State                 : Not Applicable
Patrol Read Rate                  : Not Applicable
Patrol Read Iterations            : Not Applicable

/proc/pci gives me the scsi and the PERC:

  Bus  2, device   4, function  0:
    SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X
Fusion-MPT Dual Ultra320 SCSI (rev 8).
      IRQ 34.
      Master Capable.  Latency=72.  Min Gnt=17.Max Lat=18.
      I/O at 0xec00 [0xecff].
      Non-prefetchable 64 bit memory at 0xfe9f0000 [0xfe9fffff].
      Non-prefetchable 64 bit memory at 0xfe9e0000 [0xfe9effff].

  Bus  2, device   5, function  0:
    RAID bus controller: LSI Logic / Symbios Logic PowerEdge Expandable
RAID Controller 4 (rev 1).
      IRQ 29.
      Master Capable.  Latency=32.
      Prefetchable 32 bit memory at 0xf80f0000 [0xf80fffff].

Thanks

Marcus

--
Marcus Williams, CAD Schroer UK Limited
39 Newnham Road, Cambridge, CB3 9EY

_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com
http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq