PXE booting of PE1950

Mukarram Syed muksyed at stanford.edu
Wed Feb 28 10:50:39 CST 2007

Have you tried to modify the NIC configuration in the BIOS to enable PXE



-----Original Message-----
From: linux-poweredge-bounces at dell.com
[mailto:linux-poweredge-bounces at dell.com] On Behalf Of Dhawal Doshy
Sent: Wednesday, February 28, 2007 5:55 AM
To: Michael Green
Cc: linux-poweredge
Subject: Re: PXE booting of PE1950

Michael Green wrote:
> Bright minds,
> I'm looking for somebody who had succeeded in setting up PXE booting
> of PE1950 machines in SLES9 SP3 environment.
> I've been trying for quite some time now to setup a DHCP/NFS/TFTP/PXE
> server on one PE1950 to boot up a bunch of other PE1950s but it didn't
> work.
> I'm not looking to instal the machines from PXE, but to boot the
> machines over PXE and let them run off NFS mounted file systems.
> The knowledge that I've gathered on the topic is from  various HOWTOs
> that I found on the Internet, most of which are relatively old and/or
> Redhat based.
> So if you have succeeded in building PXE environment on PE1950 (or
> similar systems), and willing to share your knowledge  please drop me
> a note!
> I'd equally appreciate pointers to any _relevant_ reading.

I have a very new cobbler (http://cobbler.et.redhat.com/) setup in place 
  that takes care of PXE, DHCP, TFTP, Kickstarting and a few other 
things as well.. i use it for provisioning RHEL/CentOS on dell 860, xy50 
(x=1,2, y=7,8,9) servers, though it should work with any other server / 
distro. am not too sure about the NFS mounts though..

BTW, here is a link to using cobbler with SuSE.

- dhawal

Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com
Please read the FAQ at http://lists.us.dell.com/faq

More information about the Linux-PowerEdge mailing list