Two network interfaces

Dean Manners deanm at ispone.com.au
Thu Feb 15 22:38:39 CST 2007


Richard,
		I tripped on this one too.  Its mentioned on
http://linux.dell.com/debian_9g.shtml.  Affects all 9G servers with pre
2.6.19 kernels.  Iv left it as is reversed, which probably will come-back at
me when I eventually upgrade the kernels (co-located machines) :)


Regards
__________________________________________ 
Dean Manners 

> -----Original Message-----
> From: linux-poweredge-bounces at dell.com 
> [mailto:linux-poweredge-bounces at dell.com] On Behalf Of Richard Ford
> Sent: Friday, February 16, 2007 3:26 PM
> To: Greg Dickie
> Cc: linux-poweredge at dell.com
> Subject: Re: Two network interfaces
> 
> I did a 2950 install for a client 2 days ago and one weird 
> thing is that eth0 as detected by CentOS 4.4 64, maps to the 
> port labeled "2"  
> on the back of the server.  And the port labeled "1" maps to 
> eth1 in linux....
> 
> 
> On 15 Feb 2007, at 11:50 PM, Greg Dickie wrote:
> 
> >
> > How are they configured?
> >
> > Greg
> >
> > On Thu, 2007-02-15 at 16:27 +0100, Sjouk Janssen wrote:
> >>
> >> Dear,
> >>
> >> I have two network interfaces in a DELL 2950.
> >> Both are configured and are working, but if I take out the network 
> >> cable of eth0 interface the whole machine is blocked.
> >> Means you can not ping to the machine at all not on eth0 
> and not on 
> >> eth1.
> >> Is this a known issue.
> >>
> >> Sjouk Janssen
> >> Senior System Manager, Development Process Support, 
> Philips Consumer 
> >> Electronics, Building SFH1.045 - Glaslaan 2 - Eindhoven P.O. Box 
> >> 80002, 5600 JB Eindhoven The Netherlands
> >> Tel: +31 40 27 37323, Fax: +31 40 27 33416
> >> E-mail: sjouk.janssen at philips.com
> >>
> >>
> >>
> >> The information contained in this message is confidential 
> and may be 
> >> legally privileged. The message is intended solely for the 
> addressee 
> >> (s). If you are not the intended recipient, you are hereby 
> notified 
> >> that any use, dissemination, or reproduction is strictly 
> prohibited 
> >> and may be unlawful. If you are not the intended recipient, please 
> >> contact the sender by return e-mail and destroy all copies of the 
> >> original message.
> >> _______________________________________________
> >> Linux-PowerEdge mailing list
> >> Linux-PowerEdge at dell.com
> >> http://lists.us.dell.com/mailman/listinfo/linux-poweredge
> >> Please read the FAQ at http://lists.us.dell.com/faq
> > --
> > Greg Dickie
> > just a guy
> > Maximum Throughput
> >
> > _______________________________________________
> > Linux-PowerEdge mailing list
> > Linux-PowerEdge at dell.com
> > http://lists.us.dell.com/mailman/listinfo/linux-poweredge
> > Please read the FAQ at http://lists.us.dell.com/faq
> 
> 
> 
> 
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com
> http://lists.us.dell.com/mailman/listinfo/linux-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq
> 



More information about the Linux-PowerEdge mailing list