Two network interfaces
rford at candis.com.cn
Thu Feb 15 22:25:48 CST 2007
I did a 2950 install for a client 2 days ago and one weird thing is
that eth0 as detected by CentOS 4.4 64, maps to the port labeled "2"
on the back of the server. And the port labeled "1" maps to eth1 in
On 15 Feb 2007, at 11:50 PM, Greg Dickie wrote:
> How are they configured?
> On Thu, 2007-02-15 at 16:27 +0100, Sjouk Janssen wrote:
>> I have two network interfaces in a DELL 2950.
>> Both are configured and are working, but if I take out the network
>> cable of eth0 interface the whole machine is blocked.
>> Means you can not ping to the machine at all not on eth0 and not on
>> Is this a known issue.
>> Sjouk Janssen
>> Senior System Manager, Development Process Support,
>> Philips Consumer Electronics,
>> Building SFH1.045 - Glaslaan 2 - Eindhoven
>> P.O. Box 80002, 5600 JB Eindhoven
>> The Netherlands
>> Tel: +31 40 27 37323, Fax: +31 40 27 33416
>> E-mail: sjouk.janssen at philips.com
>> The information contained in this message is confidential and may be
>> legally privileged. The message is intended solely for the addressee
>> (s). If you are not the intended recipient, you are hereby notified
>> that any use, dissemination, or reproduction is strictly prohibited
>> and may be unlawful. If you are not the intended recipient, please
>> contact the sender by return e-mail and destroy all copies of the
>> original message.
>> Linux-PowerEdge mailing list
>> Linux-PowerEdge at dell.com
>> Please read the FAQ at http://lists.us.dell.com/faq
> Greg Dickie
> just a guy
> Maximum Throughput
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com
> Please read the FAQ at http://lists.us.dell.com/faq
More information about the Linux-PowerEdge