December 2007 Archives by thread
Starting: Sat Dec 1 02:47:44 CDT 2007
Ending: Mon Dec 31 16:56:15 CDT 2007
Messages: 301
- Rebuild Raid
Claudio De Luca
- Re: freq. scaling vs power consumption
michalwd1979
- OpenManage 5.3 and RHEL3 / VMware ESX 3 support
Michael E Brown
- PERC5/i cheat sheet
Moritz Mertinkat
- Dell PowerEdge 1950 III with Perc6i
wolf2k5
- ****Re: I'm uncomfortable with firmware update
Craig White
- Protecting the PERC configuration from the bewildered.
Nick_Parrott at Dell.com
- Copying a large file system (again)
Tino Schwarze
- Copying a large file system (again)
Tino Schwarze
- DRAC 5
Millie Morton
- OM 5.3
Erik Bennett
- PE 2850 Cant boot with RHEL4 kernel 2.6.9-42.ELsmp "switchroot: mount failed: 22"
Mike Hanby
- racadm on PE2950's
Adrian Gajan
- Updating system BIOS when running Ubuntu
Matt Domsch
- Unable to monitor PERC 5i with CRUX Linux
Tal Cohen
- Arp problem I think ...
Alan Bunch
- EMC Powerpath / RHEL 4 u6 / sd* devices high load
Robert Jaroszuk
- PowerEdge 2650 ext3_get_inode_loc errors
Baird, Josh
- mptscsih: ioc0: task abort: FAILED
Rainer Sabelka
- OMSA Tools, Debian etch x64, mpt/sas raid
Bryan Mclellan
- OMSA Tools, Debian etch x64, mpt/sas raid
Bas van der Vlies
- OMSA Tools, Debian etch x64, mpt/sas raid
Bryan Mclellan
- OMSA Tools, Debian etch x64, mpt/sas raid
Bryan Mclellan
- Invalid XSL path, was: RE: OMSA Tools, Debian etch x64, mpt/sas raid
Bryan Mclellan
- Invalid XSL path, was: RE: OMSA Tools, Debian etch x64, mpt/sas raid
Bryan Mclellan
- Invalid XSL path, was: RE: OMSA Tools, Debian etch x64, mpt/sas raid
Rainer Sabelka
- Applying SAS firmware updates from debian, was: RE: Invalid XSL path, was: RE: OMSA Tools, Debian etch x64
Bryan Mclellan
- Applying SAS firmware updates from debian, was: RE: Invalid XSL path, was: RE: OMSA Tools, Debian etch x64
Rainer Sabelka
- OMSA Tools, Debian etch x64, mpt/sas raid
Bryan Mclellan
- OMSA Tools, Debian etch x64, mpt/sas raid
Bas van der Vlies
- OMSA Tools, Debian etch x64, mpt/sas raid
Rainer Sabelka
- RAID Monitoring
Darren.Terry at cox.com
- suggestion for firmware page
Joshua Daniel Franklin
- EMC with Linux RHEL5
Mad Unix
- Expanding a Perc5i Raid5
Hansjörg Maurer
- BIOSFlash -- LNXI LS-1 to PowerEdge 2950
Jim Hall
- 860 Firmware upgrade
Jonathan Selander
- DRAC 5 Unable to set password
Jonathan Selander
- RHEL5 x64 + PowerPath : no /dev/emcpowerX devices available..
Florent Gilain
- Fedora 8 x86_64 vs OMSA 5.2
Matt Bernstein
- Detecting lights on Dell
Terry Gliedt
- BIOS update for SC430
Marios Pittas
- PE840: wake on lan, wake on ring
Giulio Orsero
- PE1900/RHEL5
Brian D. McGrew
- Heads up for those with 5/i raid controllers.
Matthew Schumacher
- PE1900/RHEL5
Brian D. McGrew
- Omreport system
Claudio De Luca
- ESX a supported operating system?
Mark D. Foster
- RHEL4u6 - x86_64 - EMC SAN - lockups
Tom Brown
- sas drives firmware update problem
Rainer Traut
- cannot mount LUNs
Don Peterson
- afacli and container : how to pass on to "Open" from "Valid" (usage field)?
Pierre LEBRECH
- poweredge 6600 ipmi does not start
Tony Schreiner
- cannot mount LUNs
Don Peterson
- Poweredge 2850 with CentOS 5.1 x64 - various management software components broken
Brett Dikeman
- ~physical
Mad Unix
- Lockfile not present after install OMSA
Philippe MALADJIAN
- end_request I/O error
Mad Unix
- snmp & dellomsa debian
John Heim
- Dell openmanage , Redhat and Perc6i question
Abhishek Lahiri
- SOL not working
David Sparks
- Intel Pro/1000 PT (82571) in PE 1950 not working
Matthias Loebach
- IPMI and VLANs (was: SOL not working)
Ian Durkacz
- PERC5 cheat sheet on http://linux.dell.com/storage.shtml?
Moritz Mertinkat
- IPMI and VLANs
Seshadri_N at Dell.com
- adding disk to PE2950 with Perc 5/i
Campbell McLeay
- OpenSUSE 10.3 on PowerEdge 2500
Kevin Davidson
- Bios update on PE1850 'McAfee SCM appliance'
Dan Reagan
- Strange problem with CERC 6-channel SATA card and Samsung disks
Jim Nelson
- Can't fine 10 g of memory
Alan Bunch
- Problems with PERC 5 + AMD64 + mpt-status
Santi Saez
- TTY logs
Griffin, Edward
- Chris Mowl is out of the office.
Chris Mowl
- OMSA and snmp authentication issues.
Sijis Aviles
- Dell 1600SC DRAC3 no keyboard input with RHEL 5
Beaver Beacon Mirror
- PERC4e/di manuals, non-array drives
Brett Dikeman
- PE2950 - Linux TCP Offload Engine (TOE) configuration
Gary Mansell
- adding disk to PE2950 with Perc 5/i
Campbell McLeay
- PE2950 BCM5708 Firmware problem
Paul M. Dyer
- I/O errors in PowerEdge 2900 with Megaraid SAS
Victor Olalla
- SCSI sense data error.
Paul A
- update CD for sc1425's... NOT the DVD...
Fred Skrotzki
- disk "shrunk" after going into a 2850
Brett Dikeman
- OM client for desktops?
John Oliver
- omreport..... service tag
Andreas Golla
- omreport..... service tag
Naidu Bollineni
- IA32 vs IA64 RedHat?
Shane Williams
- PE2900 + usbmassstorage modules / HANG at boot.
L.P.H. van Belle
- PE 2950 R1 Stability? R2 Backplane FRU Storage ID5 Rev A01
Brian A. Seklecki
- OSMA & PowerEdge 1600SC, Fusion MPT Driver, Kernel 2.6.23.12 -> mptctl_ioctl() messages
Torsten Krah
- Dell NX1950 NAS Question
Rogers, Jamie
- OMSA web interface not loading
Adam Williams
- Redundant NFS storage setup (part 3) : The disappointing PERC5/E
Matthias Saou
- Redundant NFS storage setup (part 3) : The disappointing PERC5/E
Harry Roberts
- Dell optiplex 755 drivers for linux
leilei175 at gmail.com
- Teaming Broadcom NICS ?
Randy Johnson
- Drac Ip
Claudio De Luca
- monitoring server via nagios
John Heim
- Software repository not installing.
Erinn Looney-Triggs
- Monitoring server via snmp?
John Heim
- monitoring server load, answer
John Heim
- Install OpenManage 5.3.0 Managed Node fails with no errors
Mike Hanby
- 10 gigabit ethernet
Hall, James F CTR USAF ASC/ASC/HP
Last message date:
Mon Dec 31 16:56:15 CDT 2007
Archived on: Mon Dec 31 16:56:43 CDT 2007
This archive was generated by
Pipermail 0.09 (Mailman edition).