OMSA web interface not loading

[Nick_Parrott at Dell.com]

I'd say IE7 is your main problem.. Try another browser to isolate the
issue, it's quite possible that OMSA is fine but IE7 will not play using
the default security settings. Try adding the site (https) to your
trusted zone and try again if you REALLY want to use IE7, but depending
upon your version of OMSA, IE7 may not be supported.

 

Please advise OMSA version, and whether another Browser succeeds (IE6
should be best, Firefox will work)

 

From: linux-poweredge-bounces at dell.com
[mailto:linux-poweredge-bounces at dell.com] On Behalf Of Adam Williams
Sent: 23 December 2007 17:14
To: Rarach
Cc: linux-poweredge-Lists
Subject: Re: OMSA web interface not loading

 

same error with https://10.8.16.2:1311

Rarach wrote: 

Hi,

use https

Vladimir

2007/12/23, Adam Williams <awilliam at mdah.state.ms.us >:
> I have a PE2900 running CentOS 4.6.  When I go to
http://10.8.16.2:1311
> the OMSA web interface doesn't load.  IE7 displays:
> 
> The website declined to show this webpage 
>  HTTP 403
>    Most likely causes:
> This website requires you to log in.
> 
>    What you can try:
>      Go back to the previous page.
> 
>      More information
> 
> This error (HTTP 403 Forbidden) means that Internet Explorer was able
to
> connect to the website, but it does not have permission to view the
webpage.
> 
> For more information about HTTP errors, see Help. 
> 
> 
> but OMSA is running:
> 
> [root at preshs rc3.d]# srvadmin-services.sh status
> dell_rbu (module) is running
> ipmi driver is running
> dsm_sa_datamgr32d (pid 25957 25848) is running 
> dsm_sa_eventmgr32d (pid 25870) is running
> dsm_sa_snmp32d (pid 25881) is running
> dsm_om_shrsvc32d (pid 25910) is running
> dsm_om_connsvc32d (pid 25983 25982) is running
> 
> firewall isn't on: 
> 
> [root at preshs rc3.d]# /etc/rc.d/init.d/iptables status
> Firewall is stopped.
> 
> and I can telnet to port 1311 so it is answering tcp/ip connections.
> 
> [root at preshs rc3.d ]# telnet 10.8.16.2 1311
> Trying 10.8.16.2...
> Connected to preshs.mdah.state.ms.us (10.8.16.2).
> Escape character is '^]'.
> 
> The server is running.  I can SSH into it and operate it from command
> line as normal.  any clue as to why the OMSA web interface isn't
loading?
> 
> 
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com
> http://lists.us.dell.com/mailman/listinfo/linux-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq
> 


-- 
vladovo.mistecko.cz

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20071224/3953e7e7/attachment.htm