EMC with Linux RHEL5

[Mad Unix]

attached the output of each server
[root at linux1 ~]# powermt display
Symmetrix logical device count=0
CLARiiON logical device count=2
Hitachi logical device count=0
Invista logical device count=0
HP xp logical device count=0
Ess logical device count=0
HP HSx logical device count=0
==============================================================================
----- Host Bus Adapters ---------  ------ I/O Paths -----  ------ Stats
------
###  HW Path                       Summary   Total   Dead  IO/Sec Q-IOs
Errors
==============================================================================
   1 qla2xxx                       optimal       2      0       -     0
0
   2 qla2xxx                       optimal       2      0       -     0
0


[root at linux2 ~]# powermt display
Symmetrix logical device count=0
CLARiiON logical device count=2
Hitachi logical device count=0
Invista logical device count=0
HP xp logical device count=0
Ess logical device count=0
HP HSx logical device count=0
==============================================================================
----- Host Bus Adapters ---------  ------ I/O Paths -----  ------ Stats
------
###  HW Path                       Summary   Total   Dead  IO/Sec Q-IOs
Errors
==============================================================================
   1 qla2xxx                       optimal       2      0       -     0
0
   2 qla2xxx                       optimal       2      0       -     0
0

[root at linux3 ~]# powermt display
Symmetrix logical device count=0
CLARiiON logical device count=2
Hitachi logical device count=0
Invista logical device count=0
HP xp logical device count=0
Ess logical device count=0
HP HSx logical device count=0
==============================================================================
----- Host Bus Adapters ---------  ------ I/O Paths -----  ------ Stats
------
###  HW Path                       Summary   Total   Dead  IO/Sec Q-IOs
Errors
==============================================================================
   1 qla2xxx                       optimal       2      0       -     0
0
   2 qla2xxx                       optimal       2      0       -     0
0


On Dec 9, 2007 1:59 PM, Mad Unix <madunix at gmail.com> wrote:

> Dear sir
>
> Am thinking about this issue the host connectivity issues that am facing
> right
> now it has to do with the installation the one who has done the
> installation did some manual
> registration mostly ....??? am not sure
> Am thinking just just to do the unregister for
> these gray icons HBA and just clean it up from the system  ... what you
> think?
>
> Thanks
>
>
>
> On Dec 9, 2007 1:55 PM, < Harald_Jensas at dell.com> wrote:
>
> >  Hi,
> >
> >
> >
> > Your FC HBAs has not logged into the Front End FC Ports of your Clariion
> > Array.
> >
> > In "network terms" there is no Link. This could be a physical problem,
> > or a logical problem like a bad zoning configuration etc.
> >
> >
> >
> > Possible Causes:
> >
> >
> >
> > 1.       The Driver for the HBAs is not loaded.
> >
> > 2.       The Fibre Cables are not connected/broken.
> >
> > 3.       If you have FC Switches/Switch the Zoning Configuration might
> > not be correct.
> >
> > 4.       One of several different hardware components could be broken,
> > HBAs, FC Switch, FC Switch GBICs etc.
> >
> >
> >
> >
> >
> > --
> >
> > Harald
> >
> >
> >
> >
> >
> >
> >
> > *From:* linux-poweredge-bounces at dell.com [mailto:
> > linux-poweredge-bounces at dell.com] *On Behalf Of *Mad Unix
> > *Sent:* 09 December 2007 11:33
> > *To:* linux-poweredge-Lists
> > *Subject:* EMC with Linux RHEL5
> >
> >
> >
> > Problem:  Linux hosts attached to CLARiiON CX10 array shows Fibre Login
> > status Not Logged In, am using Navisphere Manager 6.x
> >
> > Connectivity status displays the following for hosts the following
> >
> >         Icon beside "Initiator WWN" field ===>Icon is grayed out
> >         "Fibre Logged in"                          ===>Displays as "No"
> >         "Registered"                                 ===>Displays as
> > "Yes"
> >
> > What could be?
> >
> >
> > --
> > madunix
> >
>
>
>
> --
> madunix




-- 
madunix
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20071209/295989be/attachment-0001.htm