EMC with Linux RHEL5

[Mad Unix]

Dear sir

Am thinking about this issue the host connectivity issues that am facing
right
now it has to do with the installation the one who has done the installation
did some manual
registration mostly ....??? am not sure
Am thinking just just to do the unregister for
these gray icons HBA and just clean it up from the system  ... what you
think?

Thanks


On Dec 9, 2007 1:55 PM, <Harald_Jensas at dell.com> wrote:

>  Hi,
>
>
>
> Your FC HBAs has not logged into the Front End FC Ports of your Clariion
> Array.
>
> In "network terms" there is no Link. This could be a physical problem, or
> a logical problem like a bad zoning configuration etc.
>
>
>
> Possible Causes:
>
>
>
> 1.       The Driver for the HBAs is not loaded.
>
> 2.       The Fibre Cables are not connected/broken.
>
> 3.       If you have FC Switches/Switch the Zoning Configuration might not
> be correct.
>
> 4.       One of several different hardware components could be broken,
> HBAs, FC Switch, FC Switch GBICs etc.
>
>
>
>
>
> --
>
> Harald
>
>
>
>
>
>
>
> *From:* linux-poweredge-bounces at dell.com [mailto:
> linux-poweredge-bounces at dell.com] *On Behalf Of *Mad Unix
> *Sent:* 09 December 2007 11:33
> *To:* linux-poweredge-Lists
> *Subject:* EMC with Linux RHEL5
>
>
>
> Problem:  Linux hosts attached to CLARiiON CX10 array shows Fibre Login
> status Not Logged In, am using Navisphere Manager 6.x
>
> Connectivity status displays the following for hosts the following
>
>         Icon beside "Initiator WWN" field ===>Icon is grayed out
>         "Fibre Logged in"                          ===>Displays as "No"
>         "Registered"                                 ===>Displays as "Yes"
>
> What could be?
>
>
> --
> madunix
>



-- 
madunix
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20071209/781bf6d2/attachment.htm