EMC with Linux RHEL5

[Harald_Jensas at Dell.com]

Hi,

 

Your FC HBAs has not logged into the Front End FC Ports of your Clariion Array. 

In “network terms” there is no Link. This could be a physical problem, or a logical problem like a bad zoning configuration etc.

 

Possible Causes:

 

1.       The Driver for the HBAs is not loaded.

2.       The Fibre Cables are not connected/broken.

3.       If you have FC Switches/Switch the Zoning Configuration might not be correct.

4.       One of several different hardware components could be broken, HBAs, FC Switch, FC Switch GBICs etc.

 

 

--

Harald

 

 

 

From: linux-poweredge-bounces at dell.com [mailto:linux-poweredge-bounces at dell.com] On Behalf Of Mad Unix
Sent: 09 December 2007 11:33
To: linux-poweredge-Lists
Subject: EMC with Linux RHEL5

 

Problem:  Linux hosts attached to CLARiiON CX10 array shows Fibre Login 
status Not Logged In, am using Navisphere Manager 6.x

Connectivity status displays the following for hosts the following

        Icon beside "Initiator WWN" field ===>Icon is grayed out 
        "Fibre Logged in"                          ===>Displays as "No"
        "Registered"                                 ===>Displays as "Yes"

What could be? 


-- 
madunix 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20071209/1b387be5/attachment.htm