Dell Poweredge 1950 freezing

[Chmouel Boudjnah]

Hi,

Thanks for that, but do you have any idea why it keep trying to
rebuild the array ? Do you think any faulty disks ?

Cheers, Chmouel.

John <jses27 at gmail.com> writes:

> It is Rebuilding the Array!
>
>
>
>     ,----
>     | root at ying:~> omreport storage  controller
>     |  Controller  PERC 5/i Integrated (Embedded)
>     |
>     | Controllers
>     | ID                                : 0
>     | Status                            : Ok
>     | Name                              : PERC 5/i Integrated
>     | Slot ID                           : Embedded
>     | State                             : Ready
>     | Firmware Version                  : 5.1.1-0040
>     | Minimum Required Firmware Version : Not Applicable
>     | Driver Version                    : 00.00.03.01
>     | Minimum Required Driver Version   : Not Applicable
>     | Number of Connectors              : 2
>
>
> | Rebuild Rate                      : 30%
>
>     | BGI Rate                          : 30%
>     | Check Consistency Rate            : 30%
>     | Reconstruct Rate                  : 30%
>     | Alarm State                       : Not Applicable
>     | Cluster Mode                      : Not Applicable
>     | SCSI Initiator ID                 : Not Applicable
>     | Cache Memory Size                 : 256 MB
>     | Patrol Read Mode                  : Auto
>     | Patrol Read State                 : Stopped
>     | Patrol Read Rate                  : 30%
>     | Patrol Read Iterations            : 11
>     `----

-- 
http://www.squiz.net