2650 continuous beeping

[Aaron Scamehorn]

This is likely the PERC3DC alarm, indicating something is wrong w/ one
of you raid arrays.

Pull the front off your PV220s; you probably have a bad disk (flashing
amber). 

Without OMSA, you'll have to reboot, go into Raid Config to disable the
alarm & rebuild the Array.

-----Original Message-----
From: linux-poweredge-bounces at dell.com
[mailto:linux-poweredge-bounces at dell.com] On Behalf Of Ernie Buford
Sent: Thursday, August 02, 2007 1:13 PM
To: linux-poweredge at dell.com
Subject: 2650 continuous beeping

A PE2650 started beeping this afternoon, and I'd very much
like it to stop.  Secondarily (as nothing really appears to be
wrong), I'd like to know the cause.  It's a steady beep --
once every 1 or 2 seconds, which doesn't seem to be
described in the manuals unless I've just missed it.

I don't yet have OMSA installed as I just recently upgraded
to RHEL4.  This system has a PERC3Di and PERC3DC
with PV220S and PV132T attached.

Suggestions?

Ernie

_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com
http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq