2950 with 64-bit RHEL 4.5 hangs at "GRUB loading stage2"

[Mukarram Syed]

Also, I think if you remove the "rhgb quiet" from the grub.conf, it should
echo the output to the screen.


-----Original Message-----
From: linux-poweredge-bounces at dell.com
[mailto:linux-poweredge-bounces at dell.com] On Behalf Of J. Epperson
Sent: Wednesday, August 01, 2007 10:46 AM
To: linux-poweredge at dell.com
Subject: Re: 2950 with 64-bit RHEL 4.5 hangs at "GRUB loading stage2"

On Wed, August 1, 2007 13:17, Eric Sisler wrote:
> I just wiped a 2950 running 32-bit RHEL 4.5 (PERC 5/i, SAS drives) and
> installed 64-bit RHEL 4.5.  The install went smoothly, but hangs at
> "GRUB loading stage2".  The same server booted just fine with 32-bit
> RHEL 4.5.
>
> I can boot the RHEL install CD to rescue mode & see my newly-installed
> OS, so what gives?
>
> Any help is most appreciated as I'm trying to get this server back into
> production.  Thanks!
>

Things to try that are unlikely to break anything any worse.

Boot the rescue CD, chroot to /sysimage then

Make sure /etc/modprobe.conf has an alias line for megaraid_sas.

VER=`uname -r`;/sbin/mkinitrd -v -f  /boot/initrd-$VER $VER

grub-install

If it's getting to stage2, the grub-install is probably superfluous, if
you have time, you might see what results you get from just rebuilding the
initrd.

_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com
http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq