RHEL 3 kickstart - megaraid_sas driver

[Patrick_Boyd at Dell.com]

You need atleast RHEL 3 update 6 to have the megaraid_sas driver in the
system. You should be able to upgrade and use the same kickstart files.
 
Patrick Boyd 
Dell Storage Software Engineer 
(512)728-3182 


________________________________

From: linux-poweredge-bounces at dell.com
[mailto:linux-poweredge-bounces at dell.com] On Behalf Of Robert MacNutt
Sent: Friday, September 29, 2006 1:01 PM
To: linux-poweredge-Lists
Subject: RHEL 3 kickstart - megaraid_sas driver


Please ignore my previous posts about this (I'm still learning, but not
out of the woods yet)
 
PE-2950 w/ PERC 5i card.
Installing RHEL 3.0 using kickstart provided by application vendor
(McKesson).
Kickstart cfg file contains the following line...
 
device scsi megaraid2
 
...and works fine on our older PE2850's w/PERC 4e/Di, but of course
won't work on these new servers.  I edited the file, and changed
megaraid2 to megaraid_sas, but the install still complains: ""unable to
find any devices of the type needed for this installation type"
 
I'm working with McKesson, on it, but have the feeling they haven't run
into this yet.  I'm under the gun to get 5 of these ready to roll by
next Wednesday, so I'm reaching for any answers I can get.  
 
Any help would be much-appreciated.
 
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20060929/7b5a1872/attachment.htm