PE 1950 - RHEL4 u4 - OMSA 5 issue
Patrick_Boyd at Dell.com
Patrick_Boyd at Dell.com
Wed Sep 27 09:15:18 CDT 2006
I need to know more about what hardware is in this system. Judgeing by
the script output there is either a SAS 5/i, SAS 5/iR, or SAS 5/E in the
system. The storage component of OMSA doesn't do too much with these
devices. Can you send me the ouput from lspci? I should be able to tell
you if storage should be displayed or not from this.
Thanks,
Patrick Boyd
Dell Storage Software Engineer
(512)728-3182
-----Original Message-----
From: linux-poweredge-bounces at dell.com
[mailto:linux-poweredge-bounces at dell.com] On Behalf Of Tom Brown
Sent: Wednesday, September 27, 2006 6:23 AM
To: linux-poweredge-Lists
Subject: PE 1950 - RHEL4 u4 - OMSA 5 issue
Hi
I have OMSA running on various RHEL4 u4 2950's but when i goto install
onto a 1950 i encounter an issue. The install seems to go fine and i can
start the services like so..
# srvadmin-services.sh start
Starting mptctl:
Waiting for mptctl driver registration to complete:
[ OK ]
Starting Systems Management Device Drivers:
Starting dell_rbu: [ OK ]
Starting ipmi driver: Already started [ OK ]
Starting Systems Management Data Engine:
Starting dsm_sa_datamgr32d: [ OK ]
Starting dsm_sa_eventmgr32d: [ OK ]
Starting dsm_sa_snmp32d: [ OK ]
Starting DSM SA Shared Services: [ OK ]
Starting DSM SA Connection Service: [ OK ]
However when i goto the admin page i see no info regarding the RAID and
also there is no temperature info available etc. I installed this using
OMI-SrvAdmin-Dell-Web-LX-50_A00.tar.gz
which is the same package that worked fine on the 2950's - Does anyone
have any clues as to this?
thanks
_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com
http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq
More information about the Linux-PowerEdge
mailing list