dell_rbu gcc version conflict

[Tom Haddon]

Hi Folks,

I'm trying to install OMI-SrvAdmin-Dell-Web-LX-50_A00.tar.gz on an FC3
box running 2.6.12-1.1381_FC3smp. When I try to startup the services, I
get the following:

./srvadmin-services.sh start
Starting mptctl:
Waiting for mptctl driver registration to complete:
                                                           [  OK  ]

Starting Systems Management Device Drivers:
Building dell_rbu using DKS:                               [  OK  ]
Starting dell_rbu:                                         [FAILED]
dell_rbu device driver load failed for kernel 2.6.12-1.1381_FC3smp.
See /var/log/dell_rbu.log for output from modprobe.
Starting ipmi driver:                                      [FAILED]
Starting Systems Management Device Drivers:
Building dell_rbu using DKS:                               [  OK  ]
Starting dell_rbu:                                         [FAILED]
dell_rbu device driver load failed for kernel 2.6.12-1.1381_FC3smp.
See /var/log/dell_rbu.log for output from modprobe.
Starting ipmi driver:                                      [FAILED]
Starting DSM SA Shared Services:                           [  OK  ]

Starting DSM SA Connection Service:                        [  OK  ]

Looking in /var/log/dell_rbu.log, I see:

FATAL: Error inserting dell_rbu
(/lib/modules/2.6.12-1.1381_FC3smp/kernel/drivers/firmware/dell_rbu.ko):
Invalid module format
FATAL: Error inserting dell_rbu
(/lib/modules/2.6.12-1.1381_FC3smp/kernel/drivers/firmware/dell_rbu.ko):
Invalid module format

and in dmesg, I see:


dell_rbu: version magic '2.6.12-1.1381_FC3smp SMP 686 REGPARM 4KSTACKS
gcc-4.1' should be '2.6.12-1.1381_FC3smp SMP 686 REGPARM 4KSTACKS
gcc-3.4'

I've seen this gcc error before, but that was when I was using version
4.5 - and previously my fix had been to upgrade to OMSA 5.0. Can anyone
suggest another avenue of attack?

Thanks, Tom
-- 
Tom Haddon <tom at greenleaftech.net>