CX300 + PE2950 => No support with shipped kernel version ?

[JACOB_LIBERMAN at Dell.com]

Hi florent,

1.  Which HBAs are in your servers?  (For example, Qlogic 2360)

2.  Will you be using EMC PowerPath for multi-path IO?

If you answer these questions I can send you a list of configurations
validated by EMC.  

Dell will support everything validated by EMC.

Thanks, Jacob
 

> -----Original Message-----
> From: linux-poweredge-bounces at dell.com 
> [mailto:linux-poweredge-bounces at dell.com] On Behalf Of Sander Steffann
> Sent: Monday, September 04, 2006 2:09 PM
> To: Florent Gilain; linux-poweredge-Lists
> Subject: Re: CX300 + PE2950 => No support with shipped kernel 
> version ?
> 
> Hello Florent,
> 
> > How could i install the older kernel that is asked to me now that i 
> > have a newer one already installed ? :
> >
> > Kernel i need to have is : 2.6.9-34.0.2.EL update 3 Kernel 
> i actually 
> > have : 2.6.9-5.Elsmp
> 
> I think you are mixing up the version numbers. The kernel you 
> have (2.6.9-5) is the oldest kernel available for RHEL4. The 
> 2.6.9-34.0.2 kernel is much newer, so upgrading to it should 
> be no problem.
> 
> > PS : i need to suite EMC's compatibility check list for the HBA 
> > drivers....
> 
> I think 2.6.9-42 is also supported by EMC, but you'll have to 
> check the compatibility list for that.
> 
> Good luck,
> Sander
> 
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com
> http://lists.us.dell.com/mailman/listinfo/linux-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq
>