omsa 4.5 dcdbas error

[Paul A]

Well I got OMSA installed on a 2450, but I cant run certain commands in the
CLI mode.

I also get and error with dcdbas. 

[root at smtp2 oma]# /usr/bin/srvadmin-services.sh start
Starting Systems Management Device Drivers:
Starting dcdbas device driver:                             [FAILED]
mknod failed for dcdbas device driver.
See /var/log/dcdbas.log for output from mknod.
Starting OM Common Services:                               [  OK  ]
Starting Secure Port Server:                               [  OK  ]
[root at smtp2 oma]# /usr/bin/srvadmin-services.sh stop
Shutting down OM Common Services:                          [  OK  ]
Shutting down Secure Port Server:                          [  OK  ]

[root at smtp2 oma]# /opt/dell/srvadmin/hapi/bin/instsvcdrv start
Starting Systems Management Device Drivers:
Starting dcdbas device driver:                             [FAILED]
mknod failed for dcdbas device driver.
See /var/log/dcdbas.log for output from mknod.
[root at smtp2 oma]# cat /var/log/dcdbas.log
mknod: wrong number of arguments
Try `mknod --help' for more information.

----------------

/var/log/dcdbas.log displays:

mknod parameters:
NAME:  /dev/EsmBASDev0
TYPE:  c
MAJOR:
MINOR: 0

-------------

[root at smtp2 oma]# modprobe -l dcdbas
/lib/modules/2.6.9-42.0.2.ELsmp/kernel/drivers/firmware/dcdbas.ko
/lib/modules/2.6.9-42.0.2.ELsmp/misc/dcdbas.ko

------------

[root at smtp2 oma]# omdiag chassis pci
cat: /dev/lp0: No such device or address
..
Device Name     : System
Description     : System Board Device
Location        : System Board
Additional Info : No additional information available
Test Name       : PCI Device Configuration Test
Result          : Passed
Passes          : 1
Result Event    : The test operation completed successfully.
Result Event    : For the device Intel Corporation 82557/8/9 [Ethernet Pro
100], the system reported the following status: Th
is device is disabled.
Result Event    : The following PCI devices share the same IRQ - [Dell
PowerEdge Expandable RAID Controller 3/Si]:[Adaptec RA
ID subsystem HBA] Irq: 185.

[root at smtp2 oma]# omreport chassis info
Error! Chassis info setting unavailable on this system.

Any ideas?



Thanks p