Decoding mptscsih errors
Ricardo (Tru64 User)
tru64user at yahoo.com
Tue Oct 10 15:02:00 CDT 2006
Hi,
Errors (posted at the bottom) seem to only occur
during boot. Node is experiencing intermittent
lockups...so
i am trying to follow every lead. Motherboard has been
replaced 2 days ago by Dell....lockups after a day or
so still occuring. Dell diagnostics (from EW5076A0)
and MPMemory come out clean.
Here are all the devices.
scsi2 is the where the root device is...where id 0,
lun 0 is the root
disk, and id 6, lun 0 is the controller?
The failure is in the controller(?),id 6! Trying to
understand it.....
# cat /proc/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: IFT Model: A16U-G2421-1 Rev: 347G
Type: Direct-Access ANSI SCSI
revision: 03
Host: scsi0 Channel: 00 Id: 00 Lun: 01
Vendor: IFT Model: A16U-G2421-1 Rev: 347G
Type: Direct-Access ANSI SCSI
revision: 03
Host: scsi0 Channel: 00 Id: 00 Lun: 02
Vendor: IFT Model: A16U-G2421-1 Rev: 347G
Type: Direct-Access ANSI SCSI
revision: 03
Host: scsi0 Channel: 00 Id: 00 Lun: 03
Vendor: IFT Model: A16U-G2421-1 Rev: 347G
Type: Direct-Access ANSI SCSI
revision: 03
Host: scsi0 Channel: 00 Id: 00 Lun: 04
Vendor: IFT Model: A16U-G2421-1 Rev: 347G
Type: Direct-Access ANSI SCSI
revision: 03
Host: scsi2 Channel: 00 Id: 00 Lun: 00
Vendor: FUJITSU Model: MAP3147NC Rev: 5608
Type: Direct-Access ANSI SCSI
revision: 03
Host: scsi2 Channel: 00 Id: 06 Lun: 00
Vendor: PE/PV Model: 1x3 SCSI BP Rev: 1.1
Type: Processor ANSI SCSI
revision: 02
Host: scsi3 Channel: 00 Id: 02 Lun: 00
Vendor: Promise Model: 7 Disk RAID5 Rev: V0.0
Type: Direct-Access ANSI SCSI
revision: 04
Host: scsi3 Channel: 00 Id: 02 Lun: 01
Vendor: Promise Model: 7 Disk RAID5 Rev: V0.0
Type: Direct-Access ANSI SCSI
revision: 04
Error::
Oct 8 14:07:11 genesis kernel: mptscsih: ioc2:
attempting task abort!
(sc=f25f8080)
Oct 8 14:07:11 genesis kernel: scsi2 : destination
target 6, lun 0
Oct 8 14:07:11 genesis kernel: command:
Request Sense: 03 00 00
00 fc 00
Oct 8 14:07:11 genesis kernel: mptscsih: ioc2: task
abort: SUCCESS
(sc=f25f8080)
Oct 8 14:07:11 genesis kernel: mptscsih: ioc2:
attempting target reset!
(sc=f25f8080)
Oct 8 14:07:11 genesis kernel: scsi2 : destination
target 6, lun 0
Oct 8 14:07:11 genesis kernel: command:
Inquiry: 12 00 00 00 32 00
Oct 8 14:07:15 genesis kernel: mptbase: ioc2:
IOCStatus(0x004b): SCSI IOC
Terminated
Oct 8 14:07:15 genesis kernel: mptbase: ioc2:
IOCStatus(0x004a): SCSI
Task Management Failed
Oct 8 14:07:15 genesis kernel: mptscsih: ioc2: target
reset: SUCCESS
(sc=f25f8080)
Oct 8 14:07:25 genesis kernel: mptscsih: ioc2:
attempting task abort!
(sc=f25f8080)
Oct 8 14:07:25 genesis kernel: scsi2 : destination
target 6, lun 0
Oct 8 14:07:25 genesis kernel: command: Test
Unit Ready: 00 00 00
00 00 00
Oct 8 14:07:27 genesis kernel: mptbase: Initiating
ioc2 recovery
Oct 8 14:07:32 genesis kernel: mptscsih: ioc2: task
abort: SUCCESS
(sc=f25f8080)
Oct 8 14:07:32 genesis kernel: mptscsih: ioc2:
attempting bus reset!
(sc=f25f8080)
Oct 8 14:07:32 genesis kernel: scsi2 : destination
target 6, lun 0
Oct 8 14:07:32 genesis kernel: command:
Inquiry: 12 00 00 00 32 00
Oct 8 14:07:33 genesis kernel: mptscsih: ioc2: bus
reset: SUCCESS
(sc=f25f8080)
_Thanks
Richard
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
More information about the Linux-PowerEdge
mailing list