Dell MIBs

[Patrick_Boyd at Dell.com]

Ok, So you can have OMSA with out instrumentation services or with out
storage management. And since we both have a redundacy lost alert we had
to each include one in our MIB. 

Hope that answers your question,
Patrick Boyd
Dell Storage Software Engineer
(512)728-3182
 

-----Original Message-----
From: linux-poweredge-bounces at dell.com
[mailto:linux-poweredge-bounces at dell.com] On Behalf Of Tom Haddon
Sent: Thursday, October 05, 2006 9:31 AM
To: linux-poweredge-Lists
Subject: Dell MIBs

Hi Folks,

I have an issue where I have two separate MIBs that seem to have
overlaps in the events in them:

Dell Open Manage MIB:

<event>
        <mask>
                <maskelement>
                        <mename>id</mename>
                        <mevalue>.1.3.6.1.4.1.674.10892.1</mevalue>
                </maskelement>
                <maskelement>
                        <mename>generic</mename>
                        <mevalue>6</mevalue>
                </maskelement>
                <maskelement>
                        <mename>specific</mename>
                        <mevalue>1306</mevalue>
                </maskelement>
        </mask>
        <uei>uei.opennms.org/mib2opennms/alertRedundancyLost</uei>
        <event-label>MIB-Dell-10892 defined trap event:
alertRedundancyLost</event-label>


Dell Storage MIB:

<event>
        <mask>
                <maskelement>
                        <mename>id</mename>

<mevalue>.1.3.6.1.4.1.674.10893.1.20.200</mevalue>
                </maskelement>
                <maskelement>
                        <mename>generic</mename>
                        <mevalue>6</mevalue>
                </maskelement>
                <maskelement>
                        <mename>specific</mename>
                        <mevalue>1306</mevalue>
                </maskelement>
        </mask>
        <uei>uei.opennms.org/mib2opennms/alertRedundancyLost</uei>
        <event-label>StorageManagement-MIB defined trap event:
alertRedundancyLost</event-label>

As you can see the "id" field is different, but the "specific" value is
the same. When I get an event from a server with the specific event of
1306 per that server's event logs (in this case, pulling one of two
power supplies), it is flagged as both events in my SNMP trap alerting
software (I'm using OpenNMS). 

Can anyone explain why these two MIBs have the same specific values? 

Thanks, Tom

--
Tom Haddon <tom at greenleaftech.net>

_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com
http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq