syscfg to clear bmc log on

[Kent Nasveschuk]

I get a "hardware subsystem reports command failed".
These do not have a DRAC port
Version 4.5
PE2850
RHEL3 U3

I tested this version (from DiskInfo on the CD):
OMI_VOLLABEL=510NDL_354
OMI_RELEASE=510
OMI_BUILD=354
OMI_ARCH=32
OMI_VERSION_STRING=5.1.0.354

I started ipmi "service ipmi start"; used "ipmitool sel clear" and it
worked perfect. I think its best that I uninstall the old OMSA and
re-install the latest version, unless there is another way. I have at
least 15 machines that I know of that I have to do this to.

Kent N

On Wed, 2006-10-04 at 10:36 +0200, Harald_Jensas at Dell.com wrote:
> Hi,
>  
> 1. What system is this? , Dell PowerEdge ?
>  
> 2. "omconfig system esmlog action=clear" Should work.
>  - What error does this give you?
>  - What version of OMSA is installed?
>    - Are the OMSA services loaded?
>  
>  
> //
> Harald
>         
>         ______________________________________________________________
>         From: linux-poweredge-bounces at dell.com
>         [mailto:linux-poweredge-bounces at dell.com] On Behalf Of Kent
>         Nasveschuk
>         Sent: 03 October 2006 09:16
>         To: linux-poweredge-Lists
>         Subject: syscfg to clear bmc log on
>         
>         
>         
>         
>         I found syscfg in the DTK2.1 tool kit. I want to use it to
>         clear  the system event log. Is there a simple way to do this
>         without installing everything under the sun? I extracted
>         dell.tar.gz located under tools on the CD. When I tried to run
>         syscfg from the bin directory I got a segmentation fault. I'm
>         assuming that I have to install this so it can find all of the
>         components. The system that I'm running this on is :
>         2.4.21-47.ELsmp #1 SMP Wed Jul 5 20:38:41 EDT 2006 i686 i686
>         i386 GNU/Linux
>         Red Hat Enterprise Linux ES release 3 (Taroon Update 8)
>         
>         The dos utility bmccfg --clearsel does the same thing only I
>         can't shut these down. I've also tried  "omconfig system
>         esmlog action=clear" but these don't have DRACs.
>         delldset_v1.1.bin same as omconfig error messages. Could use
>         some help on installing this to clear SEL.
>         
>         Kent N 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20061004/63c7ad2f/attachment.htm