PE2650 w/ Adaptec RAID 2130SLP controller

[Friedrich Clausen]

Hi,

(This might be a bit OT but useful nonetheless)

It sounds like you would have to make the aus-snmpd a sub-agent under 
Net-SNMP, much the same way OpenManage does. Eg:

smuxpeer .1.3.6.1.4.1.674.10892.1

But then you would have to find out if the aus-snmpd is an actual smux 
peer, see :

http://www.net-snmp.org/docs/README.smux.html

for more details. I have never delved into the details of smux integration.

Or, if there are normal console based (ie. not GUI) utilities with which 
to query the card you might want use them with Net-SNMP's "exec" option 
in snmpd.conf. Again, see the docs on their website. You may also want 
to post on the Net-SNMP on how to integrate Adaptec tools with Net-SNMP.

Regards,

Fred.


Gregg Phillips wrote:
> Good Morning,
> 
> I have a PE2650 with an Adaptec 2130SLP RAID controller and I would like
> to be able to run snmp queries against this card. The instructions say
> to follow the directions in the ucd-snmp instructions which is now
> net-snmp but I am unsure how to get the extension aus-snmpd running in
> net-snmp. I have been reading the man pages and the Oreilly book on SNMP
> and it isn't clear. Any help would be greatly appreciated.
> 
> TIA,
> 
> Gregg.
> 
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com
> http://lists.us.dell.com/mailman/listinfo/linux-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq