Openmanage - RHEL4 - 1855

[Pierre Bourgin]

Tom Brown a écrit :
> Hi
> 
> I have bene installing OM on 1855 blades and when i look at the web 
> front end i don't see information regarding the individual disks like i 
> would in a discreet 1850 - Does anyone have the syntax to run an 
> omreport to get the array status for a blade?

on DELL PE 1800, I'm using it:

##
## general report
##
% omreport storage vdisk
List of Virtual Disks in the System

Controller PERC 4/DC (Slot 5)
ID           : 0
Status       : Ok
Name         : Virtual Disk 0
State        : Ready
Progress     : Not Applicable
Layout       : RAID-5
Size         : 838.13 GB (899929866240 bytes)
Device Name  : /dev/sda
Read Policy  : Adaptive Read Ahead
Write Policy : Write Back
Cache Policy : Direct I/O
Stripe Size  : 64 KB

Controller LSI Logic/Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra 
320 SCSI (rev 8). (Embedded)
No virtual disks found

##
## about virtual disk #0 components on controller #0
##

% omreport storage adisk controller=0 vdisk=0
List of Array Disks belonging to Virtual Disk 0

Controller PERC 4/DC (Slot 5)
ID                        : 0:0
Status                    : Ok
Name                      : Array Disk 0:0
State                     : Online
Progress                  : Not Applicable
Capacity                  : 279.38 GB (299976622080 bytes)
Used RAID Disk Space      : 279.38 GB (299976622080 bytes)
Available RAID Disk Space : 0.00 GB (0 bytes)
Hot Spare                 : No
Product ID                : ST3300007LC
Revision                  : D703
Vendor ID                 : SEAGATE

ID                        : 0:1
Status                    : Ok
Name                      : Array Disk 0:1
State                     : Online
Progress                  : Not Applicable
Capacity                  : 279.38 GB (299976622080 bytes)
Used RAID Disk Space      : 279.38 GB (299976622080 bytes)
Available RAID Disk Space : 0.00 GB (0 bytes)
Hot Spare                 : No
Product ID                : ST3300007LC
Revision                  : D703
Vendor ID                 : SEAGATE

ID                        : 0:2
Status                    : Ok
Name                      : Array Disk 0:2
State                     : Online
Progress                  : Not Applicable
Capacity                  : 279.38 GB (299976622080 bytes)
Used RAID Disk Space      : 279.38 GB (299976622080 bytes)
Available RAID Disk Space : 0.00 GB (0 bytes)
Hot Spare                 : No
Product ID                : ST3300007LC
Revision                  : D703
Vendor ID                 : SEAGATE

ID                        : 0:3
Status                    : Ok
Name                      : Array Disk 0:3
State                     : Online
Progress                  : Not Applicable
Capacity                  : 279.38 GB (299976622080 bytes)
Used RAID Disk Space      : 279.38 GB (299976622080 bytes)
Available RAID Disk Space : 0.00 GB (0 bytes)
Hot Spare                 : No
Product ID                : ST3300007LC
Revision                  : D703
Vendor ID                 : SEAGATE


Does it help you ?

Pierre Bourgin


> thanks
> 
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com
> http://lists.us.dell.com/mailman/listinfo/linux-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq
> 


-- 
ARTERIS
The Network on Chip Company

http://www.arteris.com