PE 2850 hang on boot after a power failure.

[Fabio Arduini]

Hello all,

we have the following problem on a PE 2850  and 1850 running red hat ES
3.

Our systems are connected to a UPS but due to a long power failure
sometimes the server has been shutted down,  randomly at the reboot

The servers hang on the  message

 
Press <Ctrl-E> for BMC Setup within 5 sec......
 Strike the F1 key to continue, F2 to run the setup utility
 

It is necessary to strike the F1 key to start the server.

 

The systems  are unattended and this behaviour is non acceptable for our
applications.

 

have  you any suggestion to avoid the stop on the messages "Press..."?
Any of you have encountered the same problem?

Thanks in advance.

Fabio A.

 

 

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20060614/d686c83c/attachment-0001.htm