Somewhere under the options menu for this software there is an option to
have it give you the 'average' load for those systems. Unfortunately, you
can't config the system with the hardware that will actually be loaded in
it. It's just a toggle switch between a maximum and some arbitrary average
load.
Tom
Martin Goode
<mgoodelist at othermedia To: linux-poweredge at dell.com
.com> cc:
Sent by: Subject: 2850, 1850, 850 PowerEdge real world amp draw
linux-poweredge-bounce
s at dell.com
06/13/2006 07:35 AM
Hi All,
I have had a look at the Dell Rack Config Spreadsheet, which gives a
"worst case scenario" for power requirements on a particular server.
Does anybody have any real world amp figures (based on 230V) for the
following:
Dell 850 (single PSU, average load)
Dell 1850 (dual PSU, average load)
Dell 2850 (dual PSU, average load)
Thanks in advance
Martin
_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com
http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq