Starting OpenManage Systems Administrator (OMSA) services

Paul D. Eden peden at apiphysicians.com
Thu Dec 14 14:36:48 CST 2006


Thank you very much.  That worked.

Just as an FYI, for some reason on my box modprobe did not find ipmi_si,
but it did find ipmi_devintf.  After loading that second module the
services came up fine.

Paul

Adam Williams wrote:
> try running modprobe ipmi_si and modprobe ipmi_devintf and if that
> works put them and srvadmin-services.sh start in /etc/rc.d/rc.local
>
> Paul D. Eden wrote:
>> Hi All,
>>
>> I am setting up a Centos 3 box to use OMSA 5.0 (or hoping to) and after
>> installing all the rpms from the yum repo
>> (http://linux.dell.com/repo/software/) and running the
>> srvadmin-services.sh start command, here is what I get.
>>
>> # srvadmin-services.sh start
>> Starting Systems Management Device Drivers:
>> Starting dell_rbu:                                         [  OK  ]
>> Starting ipmi driver:                                      [FAILED]
>> Starting Systems Management Device Drivers:
>> Starting dell_rbu: Already started                         [  OK  ]
>> Starting ipmi driver:                                      [FAILED]
>> Starting DSM SA Shared Services:                           [  OK  ]
>>
>> Starting DSM SA Connection Service:                        [  OK  ]
>>
>> Does anyone know why ipmi failed?  It rpm installed fine with dkms.
>>
>> Are their more services that should be started?  If so, anyone know how
>> to enable them?
>>
>> Thanks,
>>
>> Paul
>> *************************************************************
>> The information contained in this E-mail transmission is intended
>> only for
>> the use of the individual or entity to whom it is addressed. It may
>> contain
>> privileged, confidential, and protected health information.  If you
>> received
>> it in error, you are on notice of its status.  Please notify us
>> immediately
>> by reply e-mail and then please delete this message from your system.
>> Please do not copy it or use it for any purposes, or disclose its
>> contents
>> to any other person. To do so could violate state and Federal privacy
>> laws.
>>
>> Thank you for your cooperation.
>>
>> _______________________________________________
>> Linux-PowerEdge mailing list
>> Linux-PowerEdge at dell.com
>> http://lists.us.dell.com/mailman/listinfo/linux-poweredge
>> Please read the FAQ at http://lists.us.dell.com/faq
>>
>>
>>   
>
*************************************************************
The information contained in this E-mail transmission is intended only for
the use of the individual or entity to whom it is addressed. It may contain
privileged, confidential, and protected health information.  If you received
it in error, you are on notice of its status.  Please notify us immediately
by reply e-mail and then please delete this message from your system.
Please do not copy it or use it for any purposes, or disclose its contents
to any other person. To do so could violate state and Federal privacy laws.

Thank you for your cooperation.



More information about the Linux-PowerEdge mailing list