dellmgr equiv for PERC 5/i (SAS based MegaRAID driver)

[Harald_Jensas at Dell.com]

LSILogic has a command line application, MegaCLI available in Linux, Windows and DOS that I have succesfully used with PERC 5/e controllers.

The readme file for MegaCLI - Linux:
http://www.lsilogic.com/files/support/rsa/MR_SAS_1.0_1.00.07-Linux-MegaCLI.txt


---
Harald Jensås


 

> -----Original Message-----
> From: linux-poweredge-bounces at dell.com 
> [mailto:linux-poweredge-bounces at dell.com] On Behalf Of Michael Adler
> Sent: 02 August 2006 20:28
> To: linux-poweredge-Lists
> Cc: Domsch, Matt
> Subject: dellmgr equiv for PERC 5/i (SAS based MegaRAID driver)
> 
> We've been using the utility 'dellmgr' with the PERC 4 series 
> to interact with the RAID controller while the OS is running. 
> Not pretty, but it worked OK. 
> 
> Is there an equivalent utility for a PERC 5/i that uses the 
> megaraid_sas module?
> 
> We have a new PE 2900 running Debian .
> 
> Linux somehost 2.6.16-2-686-smp #1 SMP Sun Jul 16 01:23:04 
> UTC 2006 i686 GNU/Linux
> 
> megasas: 00.00.02.04 Fri Feb 03 14:31:44 PST 2006
> megasas: 0x1028:0x0015:0x1028:0x1f03: bus 2:slot 14:func 0 
> scsi0 : LSI Logic SAS based MegaRAID driver
>   Vendor: MAXTOR    Model: ATLAS10K5_073SAS  Rev: BP00
>   Type:   Direct-Access                      ANSI SCSI revision: 05
>   Vendor: MAXTOR    Model: ATLAS10K5_073SAS  Rev: BP00
>   Type:   Direct-Access                      ANSI SCSI revision: 05
>   Vendor: MAXTOR    Model: ATLAS10K5_073SAS  Rev: BP00
>   Type:   Direct-Access                      ANSI SCSI revision: 05
>   Vendor: DP        Model: BACKPLANE         Rev: 1.00
>   Type:   Enclosure                          ANSI SCSI revision: 05
>   Vendor: DELL      Model: PERC 5/i          Rev: 1.00
>   Type:   Direct-Access                      ANSI SCSI revision: 05
> 
> 
> Thanks for your help,
> 
>  -Mike
> 
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com
> http://lists.us.dell.com/mailman/listinfo/linux-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq
>