dellmgr equiv for PERC 5/i (SAS based MegaRAID driver)

[Michael Adler]

We've been using the utility 'dellmgr' with the PERC 4 series to
interact with the RAID controller while the OS is running. Not
pretty, but it worked OK. 

Is there an equivalent utility for a PERC 5/i that uses the
megaraid_sas module?

We have a new PE 2900 running Debian .

Linux somehost 2.6.16-2-686-smp #1 SMP Sun Jul 16 01:23:04 UTC 2006 i686 GNU/Linux

megasas: 00.00.02.04 Fri Feb 03 14:31:44 PST 2006
megasas: 0x1028:0x0015:0x1028:0x1f03: bus 2:slot 14:func 0
scsi0 : LSI Logic SAS based MegaRAID driver
  Vendor: MAXTOR    Model: ATLAS10K5_073SAS  Rev: BP00
  Type:   Direct-Access                      ANSI SCSI revision: 05
  Vendor: MAXTOR    Model: ATLAS10K5_073SAS  Rev: BP00
  Type:   Direct-Access                      ANSI SCSI revision: 05
  Vendor: MAXTOR    Model: ATLAS10K5_073SAS  Rev: BP00
  Type:   Direct-Access                      ANSI SCSI revision: 05
  Vendor: DP        Model: BACKPLANE         Rev: 1.00
  Type:   Enclosure                          ANSI SCSI revision: 05
  Vendor: DELL      Model: PERC 5/i          Rev: 1.00
  Type:   Direct-Access                      ANSI SCSI revision: 05


Thanks for your help,

 -Mike