I need help ver badly

Thulasiram Srinivasan Infosys thulasi at infosys.com
Fri Oct 31 12:58:01 CST 2003

Hi jeff,

As per checkpoint the firewall will work with 2.4.18-5.

Are you running checkpoint firewall NG FP3 or NG AI?

Sent from my BlackBerry Wireless Handheld

-----Original Message-----
From: Jeff Moore <jmoore at valueclick.com>
To: Thulasiram Srinivasan Infosys <thulasi at infosys.com>
CC: Linux-PowerEdge at dell.com <Linux-PowerEdge at dell.com>
Sent: Fri Oct 31 10:07:13 2003
Subject: Re: I need help ver badly

I currently have 2.4.18-27.7.xsmp on the 1750, and it supports the 
cards very nicely.  I think the tg3 driver must have been updated 
between those releases, because -5 didn't work for me either, but -27 
works like a charm.


On Oct 31, 2003, at 7:59 AM, Thulasiram Srinivasan Infosys wrote:

> Hi,
> I have purchased 1750 PowerEdge with Broadcomm Embedded Ethernet
> controller and one pci-x Ethernet controller.
> I have installed Linux 7.3 2.4.18-5 kernel, because I want to install
> Checkpoint firewall-1 NG AI [Application Intelligence]. The NG-AI will
> work only with above kernel.
> I am unable to install Firewall Software, because the linux does not
> recognize the broadcomm card, unless I fix this I cannot install the
> firewall.
> Kindly can any one help me?
> I have broadcomm 5704 chipset.
> Dell 1750
> Dual Xenon processor with 2 GB RAM
> If you need any further information please let me know.
> Thanks in advance.
> Thulasi
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com
> http://lists.us.dell.com/mailman/listinfo/linux-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq or search the list 
> archives at http://lists.us.dell.com/htdig/

More information about the Linux-PowerEdge mailing list