I need help ver badly

Thulasiram Srinivasan Infosys thulasi at infosys.com
Fri Oct 31 10:25:00 CST 2003


Hi Gork,

I first installed NG-AI it did not work.
The installation goes fine, at the end of installation it asks for
reboot, after that it does not come up.
Then Checkpoint suggested to install Linux 7.3

Thulasi

>-----Original Message-----
>From: Gorik Vanderreken [mailto:debian at gorik.net]
>Sent: Friday, October 31, 2003 8:11 AM
>To: Thulasiram Srinivasan Infosys; Linux-PowerEdge at dell.com
>Subject: Re: I need help ver badly
>
>Hi,
>
>Why don't you install the "SecurePlatform"-OS (is Linux-based) from
>Checkpoint... I install this one on a PowerEdge 2600 without a problem
!  I
>presume it will work well with a PowerEdge 1750...
>
>Kind regards,
>
>G
>
>----- Original Message -----
>From: "Thulasiram Srinivasan Infosys" <thulasi at infosys.com>
>To: <Linux-PowerEdge at dell.com>
>Sent: Friday, October 31, 2003 4:59 PM
>Subject: I need help ver badly
>
>
>> Hi,
>>
>> I have purchased 1750 PowerEdge with Broadcomm Embedded Ethernet
>> controller and one pci-x Ethernet controller.
>>
>> I have installed Linux 7.3 2.4.18-5 kernel, because I want to install
>> Checkpoint firewall-1 NG AI [Application Intelligence]. The NG-AI
will
>> work only with above kernel.
>>
>> I am unable to install Firewall Software, because the linux does not
>> recognize the broadcomm card, unless I fix this I cannot install the
>> firewall.
>>
>> Kindly can any one help me?
>>
>> I have broadcomm 5704 chipset.
>>
>> Dell 1750
>> Dual Xenon processor with 2 GB RAM
>>
>> If you need any further information please let me know.
>>
>> Thanks in advance.
>>
>> Thulasi
>>
>> _______________________________________________
>> Linux-PowerEdge mailing list
>> Linux-PowerEdge at dell.com
>> http://lists.us.dell.com/mailman/listinfo/linux-poweredge
>> Please read the FAQ at http://lists.us.dell.com/faq or search the
list
>archives at http://lists.us.dell.com/htdig/
>>




More information about the Linux-PowerEdge mailing list