PE2650 Snmp/lm_sensors

Andrew Mann amann at
Thu Oct 9 14:40:01 CDT 2003

	What command are you using?  There isn't anything available 
specifically at . so a 'snmpget' wont work, use 
'snmpwalk' instead or try get with OID .


Chris Field wrote:

> there seems to be something else happening, the esm.o module is loaded,
> the following are running
> 10980 ?        00:00:34 dcstor32d
> 10992 ?        00:00:00 dcevt32d
> 11000 ?        00:00:00 dcsnmp32d
> as is net-snmp, and the following line is in /etc/snmp/snmpd.conf:
>  # Allow Server Administrator to connect to ucd-snmp using SMUX
>  smuxpeer .
> yet i only get the following when trying to retrieve information:
> SNMPv2-SMI::enterprises.674.10892.1 = No Such Object available on this
> agent at this OID
> Any sugestions? Thanks.
> On Thu, 2003-10-09 at 14:55, Joshua_Giles at wrote:
>>>>i believe some people have also done some work to produce a snmp mib
>>interface (?) >>into this but you may have to dig through the list archives
>>to find this.
>>This already exists w/the dcsnmpd32 process.  The 2 daemons dcstor32d and
>>dcevent32d, net-snmp and the esm.o module is all you need if you wish to
>>only GET information from your box.  Setting information is only available
>>via the OMSA (Open Manage Server Administrator) command-line or web
>>Read ya,
>>-----Original Message-----
>>From: jason andrade [mailto:jason at] 
>>Sent: Wednesday, October 08, 2003 5:45 PM
>>To: Chris Field
>>Cc: linux-poweredge at
>>Subject: Re: PE2650 Snmp/lm_sensors
>>On Wed, 8 Oct 2003, Chris Field wrote:
>>>I have a couple of poweredge 2650 servers from which i would like to 
>>>pull the informaiton about fan speed, temperature etc.  I already have 
>>>net-snmp setup and working, and was just wondering if there is an easy 
>>>way to access the information.
>>yes, download the DOMSA - aka dell openmanage server administrator which has
>>a command line and web interface.  i believe some people have also done some
>>work to produce a snmp mib interface (?) into this but you may have to dig
>>through the list archives to find this.
>>this is available for download from dell's website/ftp site and is also
>>mirrored at:
>>the current version is at 1.5.1 (aka 3.5_A01)
>>there isn't any way to access the information without going through dell's
>>ESM (embedded systems management) interface.
>>Linux-PowerEdge mailing list
>>Linux-PowerEdge at
>>Please read the FAQ at or search the list
>>archives at

Andrew Mann
Systems Administrator
Mythic Entertainment
703-934-0446 x 224

More information about the Linux-PowerEdge mailing list