Poweredge 650 -- CERC ATA100/4CH -- MegaRAID problems
jake at dtiserv2.com
Wed Oct 1 11:14:01 CDT 2003
I solved this problem by using an initial root disk image, with SCSI and MegaRAID drivers compiled as modules.
Everything is just peachy now.
On Tue, 30 Sep 2003 15:12:31 -0700
Jake Gold <jake at dtiserv2.com> wrote:
> A PowerEdge 650 with the CERC 4 channel RAID card.
> Two RAID 1'd 40G drives..
> The stock Redhat 7.3 kernel (2.4.18-3) functions just fine with this setup.
> When I boot my own fresh-stock-kernel.org 2.4.21 (kernel compiled with the megaraid drive enabled) the boot process hangs at:
> SCSI subsystem driver Revision: 1.00
> megaraid: v1.18f (Release Date: Tue Dec 10 09:54:39 EST 2002)
> megaraid: found 0x101e :0x1960:idx 0:bus 0:slot 3:func 0
> scsi0 : Found a MegaRAID controller at 0xc880d000, IRQ: 15
> scsi0 : Enabling 64 bit support
> < hangs here >
> I've also tried 2.4.22, and tested a couple recent versions of the megaraid (1.x) drivers..all hanging at the same place.
> Because I can't find any docs with any decent instructions it is highly possible that I am missing something simple.
> I'll happily accept an RTFM if you point me at the FM ;-)
> If someone would be kind enough to send me a working, recent kernel config (non-RH kernel preferably, since every option is enabled :) for me to examine that would probably more than sufficient.
> Thanks in advance.
> Jake Gold
> Systems Administrator
> DTI Services, Inc.
DTI Services, Inc.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Size: 189 bytes
Desc: not available
Url : http://lists.us.dell.com/pipermail/linux-poweredge/attachments/20031001/6bd136e4/attachment.bin
More information about the Linux-PowerEdge