Fatal Error : Controller Monitor Failed

Steve_Boley@Dell.com Steve_Boley at Dell.com
Fri Nov 22 09:10:01 CST 2002


reseat all the drives and see if it will come up.  If it still gives the
controller monitor failed it is more than likely one of the drive's scsi
controllers is failed and hanging up the scsi bus.  You can pull one of the
drives at a time until it posts and array comes up as degraded (if still
fails put the drive back in and move to the next one).
steve

-----Original Message-----
From: Nick [mailto:nicholas at 3wsi.com]
Sent: Friday, November 22, 2002 6:12 AM
To: linux-aacraid-devel at exchange.dell.com
Subject: Fatal Error : Controller Monitor Failed


ok, I'm shaken now....

I just reboot PE4600 machine..
then this message shows up
even before booting to OS
( Debian with 2.4.19 kernel, built-in aacraid driver )

Array Controller #0

Fatal Error : Controller Monitor Failed
Array Controller not started


I do not have any clue about this...
it's working just fine before...

help .. ?





------------------------------------------
Sysadmins unavailable
because they are in a meeting
talking about why they are unavailable so much

GPG KeyID : 0xA16F7FFF


_______________________________________________
Linux-aacraid-devel mailing list
Linux-aacraid-devel at dell.com
http://lists.us.dell.com/mailman/listinfo/linux-aacraid-devel
Please read the FAQ at http://lists.us.dell.com/faq or search the list
archives at http://lists.us.dell.com/htdig/




More information about the Linux-PowerEdge mailing list