Kenrnel Problems on pe2650

darren teodarren at myrealbox.com
Fri Nov 8 06:21:01 CST 2002


Hi,

I am running a PE2650 with Kernel 2.4.19 with no problems (except cannot
power-down).

I have 2 CPUs
1 36GB SCSI non-raid
1 GB ram

-----Original Message-----
From: linux-poweredge-admin at dell.com
[mailto:linux-poweredge-admin at dell.com] On Behalf Of John McMonagle
Sent: Friday, November 08, 2002 3:24 AM
To: Poweredge List
Subject: Kenrnel Problems on pe2650

I know there has been some discussion on this but have not seen any 
mentions as to the cause of the problem or what to to about it.

kernel-smp-2.4.18-10  and kernel-smp-2.4.18-17.7.x both lock a while
after
booting
with no error messages. This was the same before and after installing
omsa.

kernel-smp-2.4.18-5 runs OK.  Has some shut down problems if an abi
module is
loaded.

Have 2 processors, 2gb ram and no raid in case that helps.

As it's not on line yet I can do some playing with kernels.
I wouldn't mind doing a bit of tweaking to the source but it's rather
difficult
when one doesn't have a clue what to look for.

Anyone try a 2.4.19 kernel?

John

_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge at dell.com
http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq or search the list
archives at http://lists.us.dell.com/htdig/




More information about the Linux-PowerEdge mailing list