Regular verses Daylight Savings Time

Robert_Macaulay@Dell.com Robert_Macaulay at Dell.com
Wed Apr 24 10:43:06 CDT 2002


For Redhat, use timeconfig. tzselect outputs a string that is used for the
TZ environment variable. timeconfig changes what /etc/localtime points at.

I think tzselect outputs a string to append to the profile, /etc/localtime
is used if there is no TZ variable set.



> -----Original Message-----
> From: Karl Zander [mailto:KZander at commpartners.com]
> Sent: Tuesday, April 23, 2002 4:44 PM
> To: linux-poweredge at exchange.dell.com
> Subject: RE: Regular verses Daylight Savings Time
> 
> 
> Ok...I ran tzselect.  Choose the options for Americas, United 
> States and 
> Eastern Time zone (I am in Washington, DC).  But the server 
> is still off by 
> an hour.   UTC is also off by an hour.   It is one hour 
> behind like it is 
> still on Regular time and does not know about Daylight Savings Time.
> 
> If I do not use ntpd, where does RedHat Linux 7.2 get its 
> time from?  The 
> hardware clock in the BIOS?
> 
> Karl Zander
> 
> At 11:36 AM 4/23/2002 -0500, you wrote:
> >Run the command:   tzselect   then choose your Country (i.e. 
> Americas,
> >Option 2), then choose United States - Option 45, then 
> choose Option 9 for
> >Central Time.  It will then give you a confirmation on the 
> Date & Time.
> >
> >
> >Jeremy Sheard
> >DELL Server Support
> >
> >-----Original Message-----
> >From: Robert Berlinger [mailto:rnb at aecom.yu.edu]
> >Sent: Tuesday, April 23, 2002 11:15 AM
> >To: Matt_Domsch at exchange.dell.com; KZander at commpartners.com
> >Cc: linux-poweredge at exchange.dell.com
> >Subject: RE: Regular verses Daylight Savings Time
> >
> >
> >Actually NTP syncs to UTC -- it doesn't deal with daylight 
> savings.  The
> >conversion to local wall clock time is done by library routines.
> >
> >I don't know the answer either -- I believe it has to do with the
> >settings in /etc/localtime (which is binary data).  Normally 
> this is set
> >during the system setup -- I don't know how to modify it 
> subsequently.
> >(man tzfile talks about it from a technical standpoint).
> >
> >-----Original Message-----
> >From: linux-poweredge-admin at dell.com
> >[mailto:linux-poweredge-admin at dell.com] On Behalf Of
> >Matt_Domsch at dell.com
> >Sent: Tuesday, April 23, 2002 11:46 AM
> >To: KZander at commpartners.com
> >Cc: linux-poweredge at dell.com
> >Subject: RE: Regular verses Daylight Savings Time
> >Importance: Low
> >
> > > My 1400 server with RedHat 7.2 seems not to have recognized
> > > the switch to
> > > Daylight Savings Time.  Do I have to go into the BIOS to set
> > > the time?  Did
> > > I maybe miss something when setting up RedHat 7.2?  I do not
> > > recall having this problem with RedHat 6.2.
> >
> >I use ntpd to keep the time synchronized.  That worked 
> great!  (The BIOS
> >doesn't know about time zones or daylight savings time.)
> >
> >Thanks,
> >Matt
> >
> >--
> >Matt Domsch
> >Sr. Software Engineer
> >Dell Linux Solutions www.dell.com/linux
> >Linux on Dell mailing lists @ http://lists.us.dell.com
> >#1 US Linux Server provider for 2001!
> >
> >_______________________________________________
> >Linux-PowerEdge mailing list
> >Linux-PowerEdge at dell.com
> >http://lists.us.dell.com/mailman/listinfo/linux-poweredge
> >Please read the FAQ at http://lists.us.dell.com/faq or 
> search the list
> >archives at http://lists.us.dell.com/htdig/
> >
> >_______________________________________________
> >Linux-PowerEdge mailing list
> >Linux-PowerEdge at dell.com
> >http://lists.us.dell.com/mailman/listinfo/linux-poweredge
> >Please read the FAQ at http://lists.us.dell.com/faq or 
> search the list
> >archives at http://lists.us.dell.com/htdig/
> 
> _______________________________________________
> Linux-PowerEdge mailing list
> Linux-PowerEdge at dell.com
> http://lists.us.dell.com/mailman/listinfo/linux-poweredge
> Please read the FAQ at http://lists.us.dell.com/faq or search 
> the list archives at http://lists.us.dell.com/htdig/
> 




More information about the Linux-PowerEdge mailing list