lm_sensors config?

Frank Louwers frank at openminds.be
Mon Aug 13 16:58:01 CDT 2001


Hi,

Does anyone has a good entry for lm_sensors on a PowerEdge350?

the output of "sensors" gives me:

xray:/var/log# sensors
adm9240-i2c-0-2d
Adapter: SMBus PIIX4 adapter at 0440
Algorithm: Non-I2C SMBus adapter
2.5V:      +1.49 V  (min =  +2.22 V, max =  +2.72 V)   ALARM
Vccp1:     +1.68 V  (min =  +2.40 V, max =  +2.93 V)   ALARM
3.3V:      +3.31 V  (min =  +2.93 V, max =  +3.59 V)   
5V:        +5.10 V  (min =  +4.45 V, max =  +5.44 V)   
12V:      +11.68 V  (min = +10.68 V, max = +13.06 V)   
Vccp2:     +2.50 V  (min =  +2.40 V, max =  +2.93 V)   
fan1:     8333 RPM  (min = 3000 RPM, div = 2)          
fan2:     8544 RPM  (min = 3000 RPM, div = 2)          
temp:     +31.0°C   (limit = +60°C, hysteresis = +50°C) 
vid:      +1.70 V


Four things seem out of range: The 2.5V, Vccp1 and the two fan speeds.

For the fanspeeds, I think I should take half the value (or do the
fans realy run at 8500rpm?), but the first two entries?

I run the latest lm_sensors module (2.6.0) on a kernel 2.4.5-xfs.

My current relevant entries in /etc/sensors.conf are all commented
out...

Any suggestions?

Thanks,

frank



More information about the Linux-PowerEdge mailing list