Linux version 2.6.11.9-data1-20050520 (root@bimp) (gcc version 3.3.5 (Debian 1:3.3.5-12)) #1 SMP Fri May 20 17:31:52 UTC 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ffec000 (usable) BIOS-e820: 000000007ffec000 - 000000007ffef000 (ACPI data) BIOS-e820: 000000007ffef000 - 000000007ffff000 (reserved) BIOS-e820: 000000007ffff000 - 0000000080000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 1151MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f7e90 On node 0 totalpages: 524268 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 294892 pages, LIFO batch:16 DMI 2.3 present. ACPI: RSDP (v000 ASUS ) @ 0x000f85e0 ACPI: RSDT (v001 ASUS A7M266-D 0x30303031 MSFT 0x31313031) @ 0x7ffec000 ACPI: FADT (v001 ASUS A7M266-D 0x30303031 MSFT 0x31313031) @ 0x7ffec100 ACPI: BOOT (v001 ASUS A7M266-D 0x30303031 MSFT 0x31313031) @ 0x7ffec040 ACPI: MADT (v001 ASUS A7M266-D 0x30303031 MSFT 0x31313031) @ 0x7ffec080 ACPI: DSDT (v001 ASUS A7M266-D 0x00001000 MSFT 0x0100000b) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:6 APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:6 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: ASUS Product ID: PROD00000000 APIC at: 0xFEE00000 I/O APIC #2 Version 17 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 2 Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000) Built 1 zonelists Kernel command line: root=/dev/md0 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 1599.881 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2075420k/2097072k available (2055k kernel code, 20868k reserved, 566k data, 216k init, 1179568k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 3137.53 BogoMIPS (lpj=1568768) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000020 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. CPU0: AMD Athlon(TM) MP 1900+ stepping 02 per-CPU timeslice cutoff: 731.65 usecs. task migration cache decay timeout: 1 msecs. Booting processor 1/1 eip 2000 Initializing CPU#1 Calibrating delay loop... 3194.88 BogoMIPS (lpj=1597440) CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000020 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: AMD Athlon(TM) MP 1900+ stepping 02 Total of 2 processors activated (6332.41 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=0 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs CPU0 attaching sched-domain: domain 0: span 3 groups: 1 2 CPU1 attaching sched-domain: domain 0: span 3 groups: 2 1 NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xf1f20, last bus=3 PCI: Using configuration type 1 mtrr: v2.0 (20020519) mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs. mtrr: corrected configuration. Linux Plug and Play Support v0.97 (c) Adam Belay PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00fc5e0 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc610, dseg 0xf0000 PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver SCSI subsystem initialized PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router AMD768 [1022/7443] at 0000:00:07.3 PCI->APIC IRQ transform: 0000:00:08.0[A] -> IRQ 16 PCI->APIC IRQ transform: 0000:02:00.0[A] -> IRQ 17 PCI->APIC IRQ transform: 0000:02:01.0[A] -> IRQ 18 PCI->APIC IRQ transform: 0000:02:02.0[A] -> IRQ 19 PCI->APIC IRQ transform: 0000:02:03.0[A] -> IRQ 16 PCI->APIC IRQ transform: 0000:03:00.0[D] -> IRQ 19 PCI->APIC IRQ transform: 0000:03:04.0[A] -> IRQ 17 PCI->APIC IRQ transform: 0000:03:05.0[A] -> IRQ 18 PCI->APIC IRQ transform: 0000:03:06.0[A] -> IRQ 17 pnp: 00:0f: ioport range 0xe400-0xe47f has been reserved pnp: 00:0f: ioport range 0xe4e0-0xe4ff has been reserved Simple Boot Flag at 0x3a set to 0x1 highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 Initializing Cryptographic API isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AMD7441: IDE controller at PCI slot 0000:00:07.1 AMD7441: chipset revision 4 AMD7441: not 100% native mode: will probe irqs later AMD7441: 0000:00:07.1 (rev 04) UDMA100 controller ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: Maxtor 6Y080L0, ATA DISK drive hdb: DVD+RW RW5240, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: Maxtor 6Y080L0, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 SiI680: IDE controller at PCI slot 0000:03:05.0 SiI680: chipset revision 2 SiI680: BASE CLOCK == 133 SiI680: 100% native mode on irq 18 ide2: MMIO-DMA , BIOS settings: hde:pio, hdf:pio ide3: MMIO-DMA , BIOS settings: hdg:pio, hdh:pio Probing IDE interface ide2... hdf: Maxtor 6Y160P0, ATA DISK drive ide2 at 0xf880e080-0xf880e087,0xf880e08a on irq 18 Probing IDE interface ide3... hdh: Maxtor 6Y160P0, ATA DISK drive ide3 at 0xf880e0c0-0xf880e0c7,0xf880e0ca on irq 18 SiI680: IDE controller at PCI slot 0000:03:06.0 SiI680: chipset revision 2 SiI680: BASE CLOCK == 133 SiI680: 100% native mode on irq 17 ide4: MMIO-DMA , BIOS settings: hdi:pio, hdj:pio ide5: MMIO-DMA , BIOS settings: hdk:pio, hdl:pio Probing IDE interface ide4... hdj: Maxtor 6Y160P0, ATA DISK drive ide4 at 0xf8810080-0xf8810087,0xf881008a on irq 17 Probing IDE interface ide5... hdl: Maxtor 6Y160P0, ATA DISK drive ide5 at 0xf88100c0-0xf88100c7,0xf88100ca on irq 17 hda: max request size: 128KiB hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes supported /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 > hdc: max request size: 128KiB hdc: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hdc: cache flushes supported /dev/ide/host0/bus1/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 > hdf: max request size: 64KiB hdf: 320173056 sectors (163928 MB) w/7936KiB Cache, CHS=19929/255/63, UDMA(133) hdf: cache flushes supported /dev/ide/host2/bus0/target1/lun0: p1 hdh: max request size: 64KiB hdh: 320173056 sectors (163928 MB) w/7936KiB Cache, CHS=19929/255/63, UDMA(133) hdh: cache flushes supported /dev/ide/host2/bus1/target1/lun0: p1 hdj: max request size: 64KiB hdj: 320173056 sectors (163928 MB) w/7936KiB Cache, CHS=19929/255/63, UDMA(133) hdj: cache flushes supported /dev/ide/host4/bus0/target1/lun0: p1 hdl: max request size: 64KiB hdl: 320173056 sectors (163928 MB) w/7936KiB Cache, CHS=19929/255/63, UDMA(133) hdl: cache flushes supported /dev/ide/host4/bus1/target1/lun0: p1 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: automatically using best checksumming function: pIII_sse pIII_sse : 4300.000 MB/sec raid5: using function: pIII_sse (4300.000 MB/sec) md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 128Kbytes TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 7, 786432 bytes) TCP: Hash tables configured (established 262144 bind 65536) NET: Registered protocol family 8 NET: Registered protocol family 20 Starting balanced_irq devfs_mk_dev: could not append to parent for md/0 md: Autodetecting RAID arrays. md: autorun ... md: considering hdl1 ... md: adding hdl1 ... md: adding hdj1 ... md: adding hdh1 ... md: adding hdf1 ... md: hdc8 has different UUID to hdl1 md: hdc7 has different UUID to hdl1 md: hdc6 has different UUID to hdl1 md: hdc5 has different UUID to hdl1 md: hdc3 has different UUID to hdl1 md: hdc2 has different UUID to hdl1 md: hdc1 has different UUID to hdl1 md: hda8 has different UUID to hdl1 md: hda7 has different UUID to hdl1 md: hda6 has different UUID to hdl1 md: hda5 has different UUID to hdl1 md: hda3 has different UUID to hdl1 md: hda2 has different UUID to hdl1 md: hda1 has different UUID to hdl1 devfs_mk_dev: could not append to parent for md/9 md: created md9 md: bind md: bind md: bind md: bind md: running: raid5: device hdl1 operational as raid disk 3 raid5: device hdj1 operational as raid disk 2 raid5: device hdh1 operational as raid disk 1 raid5: device hdf1 operational as raid disk 0 raid5: allocated 4203kB for md9 raid5: raid level 5 set md9 active with 4 out of 4 devices, algorithm 2 RAID5 conf printout: --- rd:4 wd:4 fd:0 disk 0, o:1, dev:hdf1 disk 1, o:1, dev:hdh1 disk 2, o:1, dev:hdj1 disk 3, o:1, dev:hdl1 md: considering hdc8 ... md: adding hdc8 ... md: hdc7 has different UUID to hdc8 md: hdc6 has different UUID to hdc8 md: hdc5 has different UUID to hdc8 md: hdc3 has different UUID to hdc8 md: hdc2 has different UUID to hdc8 md: hdc1 has different UUID to hdc8 md: adding hda8 ... md: hda7 has different UUID to hdc8 md: hda6 has different UUID to hdc8 md: hda5 has different UUID to hdc8 md: hda3 has different UUID to hdc8 md: hda2 has different UUID to hdc8 md: hda1 has different UUID to hdc8 devfs_mk_dev: could not append to parent for md/5 md: created md5 md: bind md: bind md: running: raid1: raid set md5 active with 2 out of 2 mirrors md: considering hdc7 ... md: adding hdc7 ... md: hdc6 has different UUID to hdc7 md: hdc5 has different UUID to hdc7 md: hdc3 has different UUID to hdc7 md: hdc2 has different UUID to hdc7 md: hdc1 has different UUID to hdc7 md: adding hda7 ... md: hda6 has different UUID to hdc7 md: hda5 has different UUID to hdc7 md: hda3 has different UUID to hdc7 md: hda2 has different UUID to hdc7 md: hda1 has different UUID to hdc7 devfs_mk_dev: could not append to parent for md/4 md: created md4 md: bind md: bind md: running: raid1: raid set md4 active with 2 out of 2 mirrors md: considering hdc6 ... md: adding hdc6 ... md: hdc5 has different UUID to hdc6 md: hdc3 has different UUID to hdc6 md: hdc2 has different UUID to hdc6 md: hdc1 has different UUID to hdc6 md: adding hda6 ... md: hda5 has different UUID to hdc6 md: hda3 has different UUID to hdc6 md: hda2 has different UUID to hdc6 md: hda1 has different UUID to hdc6 devfs_mk_dev: could not append to parent for md/3 md: created md3 md: bind md: bind md: running: raid1: raid set md3 active with 2 out of 2 mirrors md: considering hdc5 ... md: adding hdc5 ... md: hdc3 has different UUID to hdc5 md: hdc2 has different UUID to hdc5 md: hdc1 has different UUID to hdc5 md: adding hda5 ... md: hda3 has different UUID to hdc5 md: hda2 has different UUID to hdc5 md: hda1 has different UUID to hdc5 devfs_mk_dev: could not append to parent for md/2 md: created md2 md: bind md: bind md: running: raid1: raid set md2 active with 2 out of 2 mirrors md: considering hdc3 ... md: adding hdc3 ... md: hdc2 has different UUID to hdc3 md: hdc1 has different UUID to hdc3 md: adding hda3 ... md: hda2 has different UUID to hdc3 md: hda1 has different UUID to hdc3 md: created md0 md: bind md: bind md: running: raid1: raid set md0 active with 2 out of 2 mirrors md: considering hdc2 ... md: adding hdc2 ... md: hdc1 has different UUID to hdc2 md: adding hda2 ... md: hda1 has different UUID to hdc2 devfs_mk_dev: could not append to parent for md/8 md: created md8 md: bind md: bind md: running: raid1: raid set md8 active with 2 out of 2 mirrors md: considering hdc1 ... md: adding hdc1 ... md: adding hda1 ... devfs_mk_dev: could not append to parent for md/1 md: created md1 md: bind md: bind md: running: raid1: raid set md1 active with 2 out of 2 mirrors md: ... autorun DONE. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 216k freed kjournald starting. Commit interval 5 seconds NET: Registered protocol family 1 Adding 4882680k swap on /dev/md8. Priority:-1 extents:1 EXT3 FS on md0, internal journal device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3 FS on md1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on md2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on md3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on md4, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-4, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-0, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-5, internal journal EXT3-fs: mounted filesystem with ordered data mode. Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected AMD 760MP chipset agpgart: Maximum main memory to use for agp memory: 1919M agpgart: AGP aperture is 32M @ 0xfc000000 cpci_hotplug: CompactPCI Hot Plug Core version: 0.2 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: HPC vendor_id 1022 device_id 700d ss_vid 0 ss_did 0 shpchp: shpc_init: cannot reserve MMIO region shpchp: shpc_init : shpc_cap_offset == 0 shpchp: HPC vendor_id 1022 device_id 7448 ss_vid 0 ss_did 0 shpchp: shpc_init: cannot reserve MMIO region shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 hw_random: AMD768 system management I/O registers at 0xE400. hw_random hardware driver 1.0.0 loaded r8169 Gigabit Ethernet driver 2.2LK loaded eth0: Identified chip type is 'RTL8169'. eth0: RTL8169 at 0xf8ad4000, 00:08:a1:3c:11:a6, IRQ 16 natsemi dp8381x driver, version 1.07+LK1.0.17, Sep 27, 2002 originally by Donald Becker http://www.scyld.com/network/natsemi.html 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder natsemi eth1: NatSemi DP8381[56] at 0xf8800000 (0000:02:00.0), 00:00:24:c3:4c:48, IRQ 17, port TP. natsemi eth2: NatSemi DP8381[56] at 0xf8000000 (0000:02:01.0), 00:00:24:c3:4c:49, IRQ 18, port TP. natsemi eth3: NatSemi DP8381[56] at 0xf7800000 (0000:02:02.0), 00:00:24:c3:4c:4a, IRQ 19, port TP. natsemi eth4: NatSemi DP8381[56] at 0xf7000000 (0000:02:03.0), 00:00:24:c3:4c:4b, IRQ 16, port TP. usbcore: registered new driver usbfs usbcore: registered new driver hub ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd 0000:03:00.0: Advanced Micro Devices [AMD] AMD-768 [Opus] USB ohci_hcd 0000:03:00.0: irq 19, pci mem 0xf6800000 ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected cmpci: version $Revision: 6.82 $ time 17:37:10 May 20 2005 cmpci: cmpci: found CM8738 adapter at io 0x8800 irq 17 cmpci: chip version = 055 parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] input: PC Speaker hdb: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 Bridge firewalling registered device eth0 entered promiscuous mode eth0: Promiscuous mode enabled. r8169: eth0: link up eth0: Promiscuous mode enabled. eth0: Promiscuous mode enabled. eth0: Promiscuous mode enabled. eth0: Promiscuous mode enabled. br0: port 1(eth0) entering learning state device eth1 entered promiscuous mode eth1: DSPCFG accepted after 0 usec. eth1: link up. eth1: Promiscuous mode enabled. eth1: Promiscuous mode enabled. eth1: Promiscuous mode enabled. eth1: Promiscuous mode enabled. eth1: Promiscuous mode enabled. br1: port 1(eth1) entering learning state device eth2 entered promiscuous mode eth2: DSPCFG accepted after 0 usec. eth2: link up. eth2: Setting full-duplex based on negotiated link capability. eth2: Promiscuous mode enabled. eth2: Promiscuous mode enabled. eth2: Promiscuous mode enabled. eth2: Promiscuous mode enabled. eth2: Promiscuous mode enabled. br2: port 1(eth2) entering learning state