How up to date is the firmware repository?

[Adam Goodall]

Thanks for that Michael, It was an out of date local mirror of the
repository. Even although it syncs once a day it had some very old
content in it which it would seem was stopping some of the newer RPM's
from being pulled down.

Thanks
Adam



-----Original Message-----
From: Michael_E_Brown at Dell.com [mailto:Michael_E_Brown at Dell.com] 
Sent: 31 March 2008 14:22
To: Adam Goodall; firmware-tools-devel at lists.us.dell.com
Subject: RE: How up to date is the firmware repository?

The repository should be up to date. The latest PERC 5i RPM is:

http://linux.dell.com/repo/firmware/cross-distro/RPMS/noarch/PERC_5_i_Ad
apter_ven_0x1028_dev_0x0015_subven_0x1028_subdev_0x1f02-a07-21.noarch.rp
m

Which is version: v.5.2.1-0066, A07

Can you run "rpm -qa | grep -i perc" and send what you have installed?
--
Michael

-----Original Message-----
From: firmware-tools-devel-bounces at lists.us.dell.com on behalf of Adam
Goodall
Sent: Mon 3/31/2008 6:37 AM
To: firmware-tools-devel at lists.us.dell.com
Subject: How up to date is the firmware repository?
 
Hi

 

I've just installed a new system using the firmware and OMSA
repositories. It's a dell 1950 server with a PERC 5i

 

I've ran through updating the firmware versions and the latest one
available for the 5i through the repository is 5.1.1-0040, it also pulls
down the latest BIOS package which is 2.2.6.

 

The bios package is the same as the latest one available from the dell
website and was last updated in February. However the PERC 5i package in
the repo is one revision behind the website, which is strange as the
last update for this was released in Novemeber.

 

I noticed the problem as because when I deploy OMSA 5.3 (or indeed 5.4)
it lists the controller as being in a degraded state due to the firmware
version:

[root at here ~]# omreport storage controller

 Controller  PERC 5/i Integrated (Embedded)

 

Controllers

ID                                : 0

Status                            : Non-Critical

Name                              : PERC 5/i Integrated

Slot ID                           : Embedded

State                             : Degraded

Firmware Version                  : 5.1.1-0040

Minimum Required Firmware Version : 5.2.1-0060

 

 

Is there a particular reason that some of the firmware packages are more
out of date than others or is the whole repo just in need of a kick?

 

Cheers

Adam
______________________________________________________________________

You might be interested in this...

Find out what funding is available for schools in England over the next three years:
http://www.rm.com/funding

______________________________________________________________________

P.S. Think Green - don't print this email unless you really need to.

This message is confidential, so please treat it appropriately and for its intended purpose only.  In particular, if it refers to any technical data, terms or prices not generally available or known, such items are "commercially sensitive information" within the terms of the Freedom of Information Act 2000 and related laws.  As it would be prejudicial to RM's commercial interests if these were disclosed, please refrain from doing so.

 

As Internet communications are not secure, please be aware that RM cannot accept responsibility for its contents.  Any views or opinions presented are those of the author only and not of RM.  If you are not the intended recipient of this e-mail, please accept our apologies and arrange for copies of it to be deleted.  For your information, RM may intercept incoming and outgoing email communications.

 

RM Education plc 
Registered Office: New Mill House, 183 Milton Park, Abingdon, Oxfordshire, OX14 4SE, England 
Registered Number: 1148594