Support for FC development?

[Michael E Brown]

On Thu, Mar 01, 2007 at 07:29:29PM -0500, Owen Mann wrote:
> It's true. I've previously done a survey of our PowerEdges, and most (but not all) PERCs use 1028:

all percs will have 1028 as the subven. The only percs that have 1028 as the ven (afaik) is the builtin ROMB Adaptec percs.

For your list below, I have updates for the majority of them.

> 
> PERC 3/DC:
>      busses:
> 	03:00.0
>      strings:
> 	RAID bus controller: American Megatrends Inc. MegaRAID (rev 20)
> 	Subsystem: Dell PowerEdge RAID Controller 3/DC
>      PCI ID: 101e:1960; Subsystem: 1028:0493

firmware for this card is in the repository.

> 
> PERC 3/Di:
>      busses:
> 	04:08.1
>      strings:
> 	RAID bus controller: Dell PowerEdge Expandable RAID Controller 3/Di (rev 01)
>      PCI ID: 1028:0002

IIRC, this is an Adaptec-based PERC. I currently only have firmware for LSI PERCs in the repo.

> 
> PERC 4/DC:
>      busses:
> 	01:06.0
> 	01:08.0
> 	03:0b.0
>      strings:
> 	RAID bus controller: LSI Logic / Symbios Logic MegaRAID (rev 01)
> 	Subsystem: Dell MegaRAID 518 DELL PERC 4/DC RAID Controller
>      PCI ID: 1000:1960 (or 1000:0518)?

firmware for this card is in the repository. (Subven 0x1028, subdevs 0x0518, 0x0520)

> 
> PERC 4e/Di:
>      busses:
> 	02:0e.0
>      strings:
>           RAID bus controller: Dell PowerEdge Expandable RAID controller 4 (rev 06)
>           Subsystem: Dell PowerEdge Expandable RAID Controller 4e/Di
>      PCI ID: 1028:0013

In the repo. (builtin, so it is going to be system specific.)
	ven 0x1028/dev 0x0013,   subven 0x1028, subdevs 0x016d, 0x016e, 0x016f, 0x0170
 
> PERC 4/Di:
>      busses:
> 	04:03.0
>      strings:
> 	RAID bus controller: Dell PowerEdge Expandable RAID controller 4/Di (rev 02)
>      PCI ID: 1028:000e or 1028:000f

Looks like it should be in the repo but I dont see it. Investigating.


> PERC 5i:
>      busses:
> 	02:0e.0
>      strings:
> 	RAID bus controller: Dell PowerEdge Expandable RAID controller 5
>      PCI ID: 1028:0015

Should be in the repo but I dont see it. Investigating.

--
Michael

> 
> 
> Michael E Brown wrote:
> > On Thu, Mar 01, 2007 at 12:15:11PM -0700, Orion Poplawski wrote:
> >> Michael_E_Brown at Dell.com wrote:
> >>> I have PERC updates in the repo now. BMC is under development (very
> >>> slowly) but I have a small problem with it so I havent released it yet.
> >> Not mine though:
> >>
> >> 04:08.1 RAID bus controller: Dell PowerEdge Expandable RAID Controller 
> >> 3/Di (rev 01)
> >> 04:08.1 0104: 1028:000a (rev 01)
> >>         Subsystem: 1028:0121
> >>
> >> Which I think is:
> >>
> >> pci_firmware(ven_0x1028_dev_0x000a_subven_0x1028_subdev_0x0121)/system(ven_0x1028_dev_0x0121)
> >> pci_firmware(ven_0x1028_dev_0x000a_subven_0x1028_subdev_0x0121)
> > 
> > That doesnt look right to me. Can you send "lspci -n -m" output? I dont think the vendor is 1028 because that is dell. Should be 101e or such.
> > --
> > Michael
> > _______________________________________________
> > firmware-tools-devel mailing list
> > firmware-tools-devel at lists.us.dell.com
> > http://lists.us.dell.com/mailman/listinfo/firmware-tools-devel