[Crowbar] "Dev Tool" working?

Tue Mar 13 08:19:04 CDT 2012

I have access to it now.  Thanks!

On Mon, Mar 12, 2012 at 8:18 PM, Brian Parker <onebrianparker at gmail.com>wrote:

> Looks like "./dev setup" requires access the clouderamanager barclamp,
> which doesn't exist (or is private).
>
> Thanks,
>
> Brian
>
> ...
> Cloning into barclamps/clouderamanager...
> Username:
> Password:
> fatal: Authentication failed
> Clone of 'https://github.com/dellcloudedge/barclamp-clouderamanager' into
> submodule path 'barclamps/clouderamanager' failed
> 2012-03-12 20:12:05 -0500: Could not perform initial clone of barclamp
> clouderamanager
>
>
> On Mon, Mar 12, 2012 at 7:50 PM, Brian Parker <onebrianparker at gmail.com>wrote:
>
>> I found the issue.  After "./dev setup" failed once due to the 403, I
>> couldn't run it again because the contents of ~/.build-crowbar.conf   wraps
>> values in escaped single quotes.  Removing the backslashes or removing the
>> file altogether solves the problem.
>>
>> $cat ~/.build-crowbar.conf
>> DEV_GITHUB_ID=\'parker21\'
>> DEV_GITHUB_PASSWD=\'password-i-use-everywhere\'
>>
>> Thanks!
>>
>> Brian
>>
>>
>> On Mon, Mar 12, 2012 at 3:31 PM, Brian Parker <onebrianparker at gmail.com>wrote:
>>
>>> Victor,
>>>
>>> Thanks!  Trying again yields the error below.  In fact, even after
>>> deleting the "personal" forks, we get the same error.
>>>
>>> Yes, the password was already fake, but I appreciate the warning!
>>>
>>> Brian
>>>
>>> ubuntu at ubuntu:~/crowbar$ ./dev setup
>>> Finding Github repos...
>>> First argument must be a file name!
>>> Creating your fork of Crowbar on Github.
>>> 2012-03-12 15:20:50 -0500: Could not fork dellcloudedge/crowbar!
>>>
>>>
>>>
>>> On Mon, Mar 12, 2012 at 3:15 PM, <Victor_Lowther at dell.com> wrote:
>>>
>>>> Intermittent 403 errors taking to Github are not unexpected, sadly
>>>> enough.  Rerunning ./dev setup should work.
>>>>
>>>> From: crowbar-bounces On Behalf Of Brian Parker
>>>> Sent: Monday, March 12, 2012 3:12 PM
>>>> To: crowbar
>>>> Subject: [Crowbar] "Dev Tool" working?
>>>>
>>>> Is the "dev tool" working for others?  I'm on Ubuntu 11.10. See below
>>>> for the error.
>>>>
>>>> Also, after failing in this way, it seems as though there is some state
>>>> to cleanup before attempting another run.  I can see that I might have to
>>>> delete the "personal" forks created by the script.
>>>>
>>>> Thanks,
>>>>
>>>> Brian
>>>>
>>>>
>>>> ubuntu at ubuntu:~/crowbar$ ./dev setup
>>>> Enter your Github username: farrez
>>>> Enter your Github password:
>>>> Enter your Github password again:
>>>> Finding Github repos...
>>>> Creating your fork of Crowbar on Github.
>>>> Creating a push URL for crowbar on Github
>>>> Adding remote for personal fork of crowbar on Github.
>>>> personal/HEAD set to master
>>>> Branch cf set up to track remote branch cf from origin.
>>>> Branch hadoop-os-build set up to track remote branch hadoop-os-build
>>>> from origin.
>>>> Branch modules set up to track remote branch modules from origin.
>>>> Branch openstack-os-build set up to track remote branch
>>>> openstack-os-build from origin.
>>>> Branch release/essex-hack/hadoop-os-build set up to track remote branch
>>>> release/essex-hack/hadoop-os-build from origin.
>>>> Branch release/essex-hack/master set up to track remote branch
>>>> release/essex-hack/master from origin.
>>>> Branch release/essex-hack/openstack-os-build set up to track remote
>>>> branch release/essex-hack/openstack-os-build from origin.
>>>> Branch release/fledermaus/master set up to track remote branch
>>>> release/fledermaus/master from origin.
>>>> Branch release/fledermaus/openstack-os-build set up to track remote
>>>> branch release/fledermaus/openstack-os-build from origin.
>>>> Branch ui set up to track remote branch ui from origin.
>>>> Branch v1.2.1-openstack set up to track remote branch v1.2.1-openstack
>>>> from origin.
>>>> Branch vlowther-barclamp-pkg-metadata set up to track remote branch
>>>> vlowther-barclamp-pkg-metadata from origin.
>>>> Branch vlowther-flattened-provisioner set up to track remote branch
>>>> vlowther-flattened-provisioner from origin.
>>>> Branch vlowther-ubuntu-bootif set up to track remote branch
>>>> vlowther-ubuntu-bootif from origin.
>>>> Already on 'release/fledermaus/master'
>>>> Submodule 'barclamps/crowbar' (
>>>> http://github.com/dellcloudedge/barclamp-crowbar.git) registered for
>>>> path 'barclamps/crowbar'
>>>> Cloning into barclamps/crowbar...
>>>> remote: Counting objects: 5658, done.
>>>> remote: Compressing objects: 100% (1983/1983), done.
>>>> remote: Total 5658 (delta 3133), reused 5625 (delta 3100)
>>>> Receiving objects: 100% (5658/5658), 20.43 MiB | 735 KiB/s, done.
>>>> Resolving deltas: 100% (3133/3133), done.
>>>> Submodule path 'barclamps/crowbar': checked out
>>>> '77a7b70a2583c1394cb1724e726682124f8bf03d'
>>>> fatal: ref HEAD is not a symbolic ref
>>>> Submodule 'barclamps/deployer' (
>>>> http://github.com/dellcloudedge/barclamp-deployer.git) registered for
>>>> path 'barclamps/deployer'
>>>> Cloning into barclamps/deployer...
>>>> remote: Counting objects: 6803, done.
>>>> remote: Compressing objects: 100% (2707/2707), done.
>>>> remote: Total 6803 (delta 3056), reused 6719 (delta 2972)
>>>> Receiving objects: 100% (6803/6803), 18.14 MiB | 875 KiB/s, done.
>>>> Resolving deltas: 100% (3056/3056), done.
>>>> Submodule path 'barclamps/deployer': checked out
>>>> '783c71fecde9552367e99b47cfc0667ae8c31edb'
>>>> fatal: ref HEAD is not a symbolic ref
>>>> Submodule 'barclamps/dns' (
>>>> http://github.com/dellcloudedge/barclamp-dns.git) registered for path
>>>> 'barclamps/dns'
>>>> Cloning into barclamps/dns...
>>>> remote: Counting objects: 262, done.
>>>> remote: Compressing objects: 100% (157/157), done.
>>>> remote: Total 262 (delta 92), reused 231 (delta 61)
>>>> Receiving objects: 100% (262/262), 34.43 KiB, done.
>>>> Resolving deltas: 100% (92/92), done.
>>>> Submodule path 'barclamps/dns': checked out
>>>> 'f182fb07c902f34b4d342ccd22afe5d4a4578f32'
>>>> fatal: ref HEAD is not a symbolic ref
>>>> Submodule 'barclamps/ganglia' (
>>>> http://github.com/dellcloudedge/barclamp-ganglia.git) registered for
>>>> path 'barclamps/ganglia'
>>>> Cloning into barclamps/ganglia...
>>>> remote: Counting objects: 250, done.
>>>> remote: Compressing objects: 100% (150/150), done.
>>>> remote: Total 250 (delta 96), reused 213 (delta 59)
>>>> Receiving objects: 100% (250/250), 37.08 KiB, done.
>>>> Resolving deltas: 100% (96/96), done.
>>>> Submodule path 'barclamps/ganglia': checked out
>>>> '68920feb8793933c49cd9b75316047e0b9a5c655'
>>>> fatal: ref HEAD is not a symbolic ref
>>>> Submodule 'barclamps/ipmi' (
>>>> http://github.com/dellcloudedge/barclamp-ipmi.git) registered for path
>>>> 'barclamps/ipmi'
>>>> Cloning into barclamps/ipmi...
>>>> remote: Counting objects: 205, done.
>>>> remote: Compressing objects: 100% (116/116), done.
>>>> remote: Total 205 (delta 77), reused 179 (delta 51)
>>>> Receiving objects: 100% (205/205), 25.08 KiB, done.
>>>> Resolving deltas: 100% (77/77), done.
>>>> Submodule path 'barclamps/ipmi': checked out
>>>> '59a7869332a2343757e8cf6eacc7c7f8265fbd57'
>>>> fatal: ref HEAD is not a symbolic ref
>>>> Submodule 'barclamps/logging' (
>>>> http://github.com/dellcloudedge/barclamp-logging.git) registered for
>>>> path 'barclamps/logging'
>>>> Cloning into barclamps/logging...
>>>> remote: Counting objects: 175, done.
>>>> remote: Compressing objects: 100% (102/102), done.
>>>> remote: Total 175 (delta 61), reused 157 (delta 43)
>>>> Receiving objects: 100% (175/175), 23.56 KiB, done.
>>>> Resolving deltas: 100% (61/61), done.
>>>> Submodule path 'barclamps/logging': checked out
>>>> '93c9df613e07ecc3f024f572e60fae2b7fe9b7e8'
>>>> fatal: ref HEAD is not a symbolic ref
>>>> Submodule 'barclamps/nagios' (
>>>> http://github.com/dellcloudedge/barclamp-nagios.git) registered for
>>>> path 'barclamps/nagios'
>>>> Cloning into barclamps/nagios...
>>>> remote: Counting objects: 621, done.
>>>> remote: Compressing objects: 100% (284/284), done.
>>>> remote: Total 621 (delta 264), reused 599 (delta 244)
>>>> Receiving objects: 100% (621/621), 646.75 KiB, done.
>>>> Resolving deltas: 100% (264/264), done.
>>>> Submodule path 'barclamps/nagios': checked out
>>>> 'bf941baa506379dbaab9ffe6ee1ae1c250bf4c5d'
>>>> fatal: ref HEAD is not a symbolic ref
>>>> Submodule 'barclamps/network' (
>>>> http://github.com/dellcloudedge/barclamp-network.git) registered for
>>>> path 'barclamps/network'
>>>> Cloning into barclamps/network...
>>>> remote: Counting objects: 677, done.
>>>> remote: Compressing objects: 100% (337/337), done.
>>>> remote: Total 677 (delta 203), reused 664 (delta 190)
>>>> Receiving objects: 100% (677/677), 8.64 MiB | 568 KiB/s, done.
>>>> Resolving deltas: 100% (203/203), done.
>>>> Submodule path 'barclamps/network': checked out
>>>> '573d584a4a17734927339495b07d338927584727'
>>>> fatal: ref HEAD is not a symbolic ref
>>>> Submodule 'barclamps/ntp' (
>>>> http://github.com/dellcloudedge/barclamp-ntp.git) registered for path
>>>> 'barclamps/ntp'
>>>> Cloning into barclamps/ntp...
>>>> remote: Counting objects: 156, done.
>>>> remote: Compressing objects: 100% (84/84), done.
>>>> remote: Total 156 (delta 48), reused 146 (delta 38)
>>>> Receiving objects: 100% (156/156), 22.73 KiB | 15 KiB/s, done.
>>>> Resolving deltas: 100% (48/48), done.
>>>> Submodule path 'barclamps/ntp': checked out
>>>> '8aa70d7215726f66e971506e59293deb7ad0255d'
>>>> fatal: ref HEAD is not a symbolic ref
>>>> Submodule 'barclamps/provisioner' (
>>>> http://github.com/dellcloudedge/barclamp-provisioner.git) registered
>>>> for path 'barclamps/provisioner'
>>>> Cloning into barclamps/provisioner...
>>>> remote: Counting objects: 1328, done.
>>>> remote: Compressing objects: 100% (677/677), done.
>>>> remote: Total 1328 (delta 604), reused 1225 (delta 501)
>>>> Receiving objects: 100% (1328/1328), 1.18 MiB | 376 KiB/s, done.
>>>> Resolving deltas: 100% (604/604), done.
>>>> Submodule path 'barclamps/provisioner': checked out
>>>> 'ebe54f389ba659667f5008892b0695995d0952a5'
>>>> fatal: ref HEAD is not a symbolic ref
>>>> Submodule 'barclamps/redhat-install' (
>>>> http://github.com/dellcloudedge/barclamp-redhat-install.git)
>>>> registered for path 'barclamps/redhat-install'
>>>> Cloning into barclamps/redhat-install...
>>>> remote: Counting objects: 481, done.
>>>> remote: Compressing objects: 100% (283/283), done.
>>>> remote: Total 481 (delta 168), reused 411 (delta 98)
>>>> Receiving objects: 100% (481/481), 53.01 KiB, done.
>>>> Resolving deltas: 100% (168/168), done.
>>>> Submodule path 'barclamps/redhat-install': checked out
>>>> '80bed0731ac0e961c3a19fbfcff55e26c14ba2cb'
>>>> fatal: ref HEAD is not a symbolic ref
>>>> Submodule 'barclamps/test' (
>>>> http://github.com/dellcloudedge/barclamp-test.git) registered for path
>>>> 'barclamps/test'
>>>> Cloning into barclamps/test...
>>>> remote: Counting objects: 108, done.
>>>> remote: Compressing objects: 100% (64/64), done.
>>>> remote: Total 108 (delta 40), reused 99 (delta 31)
>>>> Receiving objects: 100% (108/108), 17.84 KiB, done.
>>>> Resolving deltas: 100% (40/40), done.
>>>> Submodule path 'barclamps/test': checked out
>>>> 'e9846f042daf328386bf955d34b927bb3098cfab'
>>>> fatal: ref HEAD is not a symbolic ref
>>>> Submodule 'barclamps/ubuntu-install' (
>>>> http://github.com/dellcloudedge/barclamp-ubuntu-install.git)
>>>> registered for path 'barclamps/ubuntu-install'
>>>> Cloning into barclamps/ubuntu-install...
>>>> remote: Counting objects: 371, done.
>>>> remote: Compressing objects: 100% (256/256), done.
>>>> remote: Total 371 (delta 124), reused 312 (delta 65)
>>>> Receiving objects: 100% (371/371), 58.43 KiB | 102 KiB/s, done.
>>>> Resolving deltas: 100% (124/124), done.
>>>> Submodule path 'barclamps/ubuntu-install': checked out
>>>> 'afa9bd1db69de33d326591b7f42896b454a9c41b'
>>>> fatal: ref HEAD is not a symbolic ref
>>>> Already on 'release/fledermaus/master'
>>>> Branch andi-node-alloc-change set up to track remote branch
>>>> andi-node-alloc-change from origin.
>>>> Branch perf-imp set up to track remote branch perf-imp from origin.
>>>> Branch release/essex-hack/master set up to track remote branch
>>>> release/essex-hack/master from origin.
>>>> Branch rob-bc-import set up to track remote branch rob-bc-import from
>>>> origin.
>>>> Branch v1.2-openstack set up to track remote branch v1.2-openstack from
>>>> origin.
>>>> Branch v1.2.1-openstack set up to track remote branch v1.2.1-openstack
>>>> from origin.
>>>> error: Not a valid ref: refs/remotes/personal/master
>>>> personal/HEAD set to master
>>>> Branch release/essex-hack/master set up to track remote branch
>>>> release/essex-hack/master from origin.
>>>> Branch vlowther-barclamp-pkg-metadata set up to track remote branch
>>>> vlowther-barclamp-pkg-metadata from origin.
>>>> Branch vlowther-gemrc-hotfix set up to track remote branch
>>>> vlowther-gemrc-hotfix from origin.
>>>> error: Not a valid ref: refs/remotes/personal/master
>>>> personal/HEAD set to master
>>>> Branch release/essex-hack/master set up to track remote branch
>>>> release/essex-hack/master from origin.
>>>> error: Multiple remote HEAD branches. Please choose one explicitly with:
>>>>  git remote set-head personal master
>>>>  git remote set-head personal release/essex-hack/master
>>>> Branch release/essex-hack/master set up to track remote branch
>>>> release/essex-hack/master from origin.
>>>> error: Not a valid ref: refs/remotes/personal/master
>>>> personal/HEAD set to master
>>>> Branch release/essex-hack/master set up to track remote branch
>>>> release/essex-hack/master from origin.
>>>> error: Multiple remote HEAD branches. Please choose one explicitly with:
>>>>  git remote set-head personal master
>>>>  git remote set-head personal release/essex-hack/master
>>>> Branch release/essex-hack/master set up to track remote branch
>>>> release/essex-hack/master from origin.
>>>> error: The requested URL returned error: 403 while accessing
>>>> https://farrez:higuy@github.com/farrez/barclamp-logging/info/refs
>>>>
>>>> fatal: HTTP request failed
>>>> 2012-03-12 14:59:18 -0500: Cannot fetch repository info for your fork
>>>> of barclamp-logging.
>>>> ubuntu at ubuntu:~/crowbar$
>>>>
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/crowbar/attachments/20120313/27c0e7b6/attachment-0001.html 