[Crowbar] "Dev Tool" working?

Mon Mar 12 20:18:11 CDT 2012

Looks like "./dev setup" requires access the clouderamanager barclamp,
which doesn't exist (or is private).

Thanks,

Brian

...
Cloning into barclamps/clouderamanager...
Username:
Password:
fatal: Authentication failed
Clone of 'https://github.com/dellcloudedge/barclamp-clouderamanager' into
submodule path 'barclamps/clouderamanager' failed
2012-03-12 20:12:05 -0500: Could not perform initial clone of barclamp
clouderamanager

On Mon, Mar 12, 2012 at 7:50 PM, Brian Parker <onebrianparker at gmail.com>wrote:

> I found the issue.  After "./dev setup" failed once due to the 403, I
> couldn't run it again because the contents of ~/.build-crowbar.conf   wraps
> values in escaped single quotes.  Removing the backslashes or removing the
> file altogether solves the problem.
>
> $cat ~/.build-crowbar.conf
> DEV_GITHUB_ID=\'parker21\'
> DEV_GITHUB_PASSWD=\'password-i-use-everywhere\'
>
> Thanks!
>
> Brian
>
>
> On Mon, Mar 12, 2012 at 3:31 PM, Brian Parker <onebrianparker at gmail.com>wrote:
>
>> Victor,
>>
>> Thanks!  Trying again yields the error below.  In fact, even after
>> deleting the "personal" forks, we get the same error.
>>
>> Yes, the password was already fake, but I appreciate the warning!
>>
>> Brian
>>
>> ubuntu at ubuntu:~/crowbar$ ./dev setup
>> Finding Github repos...
>> First argument must be a file name!
>> Creating your fork of Crowbar on Github.
>> 2012-03-12 15:20:50 -0500: Could not fork dellcloudedge/crowbar!
>>
>>
>>
>> On Mon, Mar 12, 2012 at 3:15 PM, <Victor_Lowther at dell.com> wrote:
>>
>>> Intermittent 403 errors taking to Github are not unexpected, sadly
>>> enough.  Rerunning ./dev setup should work.
>>>
>>> From: crowbar-bounces On Behalf Of Brian Parker
>>> Sent: Monday, March 12, 2012 3:12 PM
>>> To: crowbar
>>> Subject: [Crowbar] "Dev Tool" working?
>>>
>>> Is the "dev tool" working for others?  I'm on Ubuntu 11.10. See below
>>> for the error.
>>>
>>> Also, after failing in this way, it seems as though there is some state
>>> to cleanup before attempting another run.  I can see that I might have to
>>> delete the "personal" forks created by the script.
>>>
>>> Thanks,
>>>
>>> Brian
>>>
>>>
>>> ubuntu at ubuntu:~/crowbar$ ./dev setup
>>> Enter your Github username: farrez
>>> Enter your Github password:
>>> Enter your Github password again:
>>> Finding Github repos...
>>> Creating your fork of Crowbar on Github.
>>> Creating a push URL for crowbar on Github
>>> Adding remote for personal fork of crowbar on Github.
>>> personal/HEAD set to master
>>> Branch cf set up to track remote branch cf from origin.
>>> Branch hadoop-os-build set up to track remote branch hadoop-os-build
>>> from origin.
>>> Branch modules set up to track remote branch modules from origin.
>>> Branch openstack-os-build set up to track remote branch
>>> openstack-os-build from origin.
>>> Branch release/essex-hack/hadoop-os-build set up to track remote branch
>>> release/essex-hack/hadoop-os-build from origin.
>>> Branch release/essex-hack/master set up to track remote branch
>>> release/essex-hack/master from origin.
>>> Branch release/essex-hack/openstack-os-build set up to track remote
>>> branch release/essex-hack/openstack-os-build from origin.
>>> Branch release/fledermaus/master set up to track remote branch
>>> release/fledermaus/master from origin.
>>> Branch release/fledermaus/openstack-os-build set up to track remote
>>> branch release/fledermaus/openstack-os-build from origin.
>>> Branch ui set up to track remote branch ui from origin.
>>> Branch v1.2.1-openstack set up to track remote branch v1.2.1-openstack
>>> from origin.
>>> Branch vlowther-barclamp-pkg-metadata set up to track remote branch
>>> vlowther-barclamp-pkg-metadata from origin.
>>> Branch vlowther-flattened-provisioner set up to track remote branch
>>> vlowther-flattened-provisioner from origin.
>>> Branch vlowther-ubuntu-bootif set up to track remote branch
>>> vlowther-ubuntu-bootif from origin.
>>> Already on 'release/fledermaus/master'
>>> Submodule 'barclamps/crowbar' (
>>> http://github.com/dellcloudedge/barclamp-crowbar.git) registered for
>>> path 'barclamps/crowbar'
>>> Cloning into barclamps/crowbar...
>>> remote: Counting objects: 5658, done.
>>> remote: Compressing objects: 100% (1983/1983), done.
>>> remote: Total 5658 (delta 3133), reused 5625 (delta 3100)
>>> Receiving objects: 100% (5658/5658), 20.43 MiB | 735 KiB/s, done.
>>> Resolving deltas: 100% (3133/3133), done.
>>> Submodule path 'barclamps/crowbar': checked out
>>> '77a7b70a2583c1394cb1724e726682124f8bf03d'
>>> fatal: ref HEAD is not a symbolic ref
>>> Submodule 'barclamps/deployer' (
>>> http://github.com/dellcloudedge/barclamp-deployer.git) registered for
>>> path 'barclamps/deployer'
>>> Cloning into barclamps/deployer...
>>> remote: Counting objects: 6803, done.
>>> remote: Compressing objects: 100% (2707/2707), done.
>>> remote: Total 6803 (delta 3056), reused 6719 (delta 2972)
>>> Receiving objects: 100% (6803/6803), 18.14 MiB | 875 KiB/s, done.
>>> Resolving deltas: 100% (3056/3056), done.
>>> Submodule path 'barclamps/deployer': checked out
>>> '783c71fecde9552367e99b47cfc0667ae8c31edb'
>>> fatal: ref HEAD is not a symbolic ref
>>> Submodule 'barclamps/dns' (
>>> http://github.com/dellcloudedge/barclamp-dns.git) registered for path
>>> 'barclamps/dns'
>>> Cloning into barclamps/dns...
>>> remote: Counting objects: 262, done.
>>> remote: Compressing objects: 100% (157/157), done.
>>> remote: Total 262 (delta 92), reused 231 (delta 61)
>>> Receiving objects: 100% (262/262), 34.43 KiB, done.
>>> Resolving deltas: 100% (92/92), done.
>>> Submodule path 'barclamps/dns': checked out
>>> 'f182fb07c902f34b4d342ccd22afe5d4a4578f32'
>>> fatal: ref HEAD is not a symbolic ref
>>> Submodule 'barclamps/ganglia' (
>>> http://github.com/dellcloudedge/barclamp-ganglia.git) registered for
>>> path 'barclamps/ganglia'
>>> Cloning into barclamps/ganglia...
>>> remote: Counting objects: 250, done.
>>> remote: Compressing objects: 100% (150/150), done.
>>> remote: Total 250 (delta 96), reused 213 (delta 59)
>>> Receiving objects: 100% (250/250), 37.08 KiB, done.
>>> Resolving deltas: 100% (96/96), done.
>>> Submodule path 'barclamps/ganglia': checked out
>>> '68920feb8793933c49cd9b75316047e0b9a5c655'
>>> fatal: ref HEAD is not a symbolic ref
>>> Submodule 'barclamps/ipmi' (
>>> http://github.com/dellcloudedge/barclamp-ipmi.git) registered for path
>>> 'barclamps/ipmi'
>>> Cloning into barclamps/ipmi...
>>> remote: Counting objects: 205, done.
>>> remote: Compressing objects: 100% (116/116), done.
>>> remote: Total 205 (delta 77), reused 179 (delta 51)
>>> Receiving objects: 100% (205/205), 25.08 KiB, done.
>>> Resolving deltas: 100% (77/77), done.
>>> Submodule path 'barclamps/ipmi': checked out
>>> '59a7869332a2343757e8cf6eacc7c7f8265fbd57'
>>> fatal: ref HEAD is not a symbolic ref
>>> Submodule 'barclamps/logging' (
>>> http://github.com/dellcloudedge/barclamp-logging.git) registered for
>>> path 'barclamps/logging'
>>> Cloning into barclamps/logging...
>>> remote: Counting objects: 175, done.
>>> remote: Compressing objects: 100% (102/102), done.
>>> remote: Total 175 (delta 61), reused 157 (delta 43)
>>> Receiving objects: 100% (175/175), 23.56 KiB, done.
>>> Resolving deltas: 100% (61/61), done.
>>> Submodule path 'barclamps/logging': checked out
>>> '93c9df613e07ecc3f024f572e60fae2b7fe9b7e8'
>>> fatal: ref HEAD is not a symbolic ref
>>> Submodule 'barclamps/nagios' (
>>> http://github.com/dellcloudedge/barclamp-nagios.git) registered for
>>> path 'barclamps/nagios'
>>> Cloning into barclamps/nagios...
>>> remote: Counting objects: 621, done.
>>> remote: Compressing objects: 100% (284/284), done.
>>> remote: Total 621 (delta 264), reused 599 (delta 244)
>>> Receiving objects: 100% (621/621), 646.75 KiB, done.
>>> Resolving deltas: 100% (264/264), done.
>>> Submodule path 'barclamps/nagios': checked out
>>> 'bf941baa506379dbaab9ffe6ee1ae1c250bf4c5d'
>>> fatal: ref HEAD is not a symbolic ref
>>> Submodule 'barclamps/network' (
>>> http://github.com/dellcloudedge/barclamp-network.git) registered for
>>> path 'barclamps/network'
>>> Cloning into barclamps/network...
>>> remote: Counting objects: 677, done.
>>> remote: Compressing objects: 100% (337/337), done.
>>> remote: Total 677 (delta 203), reused 664 (delta 190)
>>> Receiving objects: 100% (677/677), 8.64 MiB | 568 KiB/s, done.
>>> Resolving deltas: 100% (203/203), done.
>>> Submodule path 'barclamps/network': checked out
>>> '573d584a4a17734927339495b07d338927584727'
>>> fatal: ref HEAD is not a symbolic ref
>>> Submodule 'barclamps/ntp' (
>>> http://github.com/dellcloudedge/barclamp-ntp.git) registered for path
>>> 'barclamps/ntp'
>>> Cloning into barclamps/ntp...
>>> remote: Counting objects: 156, done.
>>> remote: Compressing objects: 100% (84/84), done.
>>> remote: Total 156 (delta 48), reused 146 (delta 38)
>>> Receiving objects: 100% (156/156), 22.73 KiB | 15 KiB/s, done.
>>> Resolving deltas: 100% (48/48), done.
>>> Submodule path 'barclamps/ntp': checked out
>>> '8aa70d7215726f66e971506e59293deb7ad0255d'
>>> fatal: ref HEAD is not a symbolic ref
>>> Submodule 'barclamps/provisioner' (
>>> http://github.com/dellcloudedge/barclamp-provisioner.git) registered
>>> for path 'barclamps/provisioner'
>>> Cloning into barclamps/provisioner...
>>> remote: Counting objects: 1328, done.
>>> remote: Compressing objects: 100% (677/677), done.
>>> remote: Total 1328 (delta 604), reused 1225 (delta 501)
>>> Receiving objects: 100% (1328/1328), 1.18 MiB | 376 KiB/s, done.
>>> Resolving deltas: 100% (604/604), done.
>>> Submodule path 'barclamps/provisioner': checked out
>>> 'ebe54f389ba659667f5008892b0695995d0952a5'
>>> fatal: ref HEAD is not a symbolic ref
>>> Submodule 'barclamps/redhat-install' (
>>> http://github.com/dellcloudedge/barclamp-redhat-install.git) registered
>>> for path 'barclamps/redhat-install'
>>> Cloning into barclamps/redhat-install...
>>> remote: Counting objects: 481, done.
>>> remote: Compressing objects: 100% (283/283), done.
>>> remote: Total 481 (delta 168), reused 411 (delta 98)
>>> Receiving objects: 100% (481/481), 53.01 KiB, done.
>>> Resolving deltas: 100% (168/168), done.
>>> Submodule path 'barclamps/redhat-install': checked out
>>> '80bed0731ac0e961c3a19fbfcff55e26c14ba2cb'
>>> fatal: ref HEAD is not a symbolic ref
>>> Submodule 'barclamps/test' (
>>> http://github.com/dellcloudedge/barclamp-test.git) registered for path
>>> 'barclamps/test'
>>> Cloning into barclamps/test...
>>> remote: Counting objects: 108, done.
>>> remote: Compressing objects: 100% (64/64), done.
>>> remote: Total 108 (delta 40), reused 99 (delta 31)
>>> Receiving objects: 100% (108/108), 17.84 KiB, done.
>>> Resolving deltas: 100% (40/40), done.
>>> Submodule path 'barclamps/test': checked out
>>> 'e9846f042daf328386bf955d34b927bb3098cfab'
>>> fatal: ref HEAD is not a symbolic ref
>>> Submodule 'barclamps/ubuntu-install' (
>>> http://github.com/dellcloudedge/barclamp-ubuntu-install.git) registered
>>> for path 'barclamps/ubuntu-install'
>>> Cloning into barclamps/ubuntu-install...
>>> remote: Counting objects: 371, done.
>>> remote: Compressing objects: 100% (256/256), done.
>>> remote: Total 371 (delta 124), reused 312 (delta 65)
>>> Receiving objects: 100% (371/371), 58.43 KiB | 102 KiB/s, done.
>>> Resolving deltas: 100% (124/124), done.
>>> Submodule path 'barclamps/ubuntu-install': checked out
>>> 'afa9bd1db69de33d326591b7f42896b454a9c41b'
>>> fatal: ref HEAD is not a symbolic ref
>>> Already on 'release/fledermaus/master'
>>> Branch andi-node-alloc-change set up to track remote branch
>>> andi-node-alloc-change from origin.
>>> Branch perf-imp set up to track remote branch perf-imp from origin.
>>> Branch release/essex-hack/master set up to track remote branch
>>> release/essex-hack/master from origin.
>>> Branch rob-bc-import set up to track remote branch rob-bc-import from
>>> origin.
>>> Branch v1.2-openstack set up to track remote branch v1.2-openstack from
>>> origin.
>>> Branch v1.2.1-openstack set up to track remote branch v1.2.1-openstack
>>> from origin.
>>> error: Not a valid ref: refs/remotes/personal/master
>>> personal/HEAD set to master
>>> Branch release/essex-hack/master set up to track remote branch
>>> release/essex-hack/master from origin.
>>> Branch vlowther-barclamp-pkg-metadata set up to track remote branch
>>> vlowther-barclamp-pkg-metadata from origin.
>>> Branch vlowther-gemrc-hotfix set up to track remote branch
>>> vlowther-gemrc-hotfix from origin.
>>> error: Not a valid ref: refs/remotes/personal/master
>>> personal/HEAD set to master
>>> Branch release/essex-hack/master set up to track remote branch
>>> release/essex-hack/master from origin.
>>> error: Multiple remote HEAD branches. Please choose one explicitly with:
>>>  git remote set-head personal master
>>>  git remote set-head personal release/essex-hack/master
>>> Branch release/essex-hack/master set up to track remote branch
>>> release/essex-hack/master from origin.
>>> error: Not a valid ref: refs/remotes/personal/master
>>> personal/HEAD set to master
>>> Branch release/essex-hack/master set up to track remote branch
>>> release/essex-hack/master from origin.
>>> error: Multiple remote HEAD branches. Please choose one explicitly with:
>>>  git remote set-head personal master
>>>  git remote set-head personal release/essex-hack/master
>>> Branch release/essex-hack/master set up to track remote branch
>>> release/essex-hack/master from origin.
>>> error: The requested URL returned error: 403 while accessing
>>> https://farrez:higuy@github.com/farrez/barclamp-logging/info/refs
>>>
>>> fatal: HTTP request failed
>>> 2012-03-12 14:59:18 -0500: Cannot fetch repository info for your fork of
>>> barclamp-logging.
>>> ubuntu at ubuntu:~/crowbar$
>>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/crowbar/attachments/20120312/f137cf8d/attachment-0001.html 