[Crowbar] "Dev Tool" working?

[Brian Parker]

I found the issue.  After "./dev setup" failed once due to the 403, I
couldn't run it again because the contents of ~/.build-crowbar.conf   wraps
values in escaped single quotes.  Removing the backslashes or removing the
file altogether solves the problem.

$cat ~/.build-crowbar.conf
DEV_GITHUB_ID=\'parker21\'
DEV_GITHUB_PASSWD=\'password-i-use-everywhere\'

Thanks!

Brian


On Mon, Mar 12, 2012 at 3:31 PM, Brian Parker <onebrianparker at gmail.com>wrote:

> Victor,
>
> Thanks!  Trying again yields the error below.  In fact, even after
> deleting the "personal" forks, we get the same error.
>
> Yes, the password was already fake, but I appreciate the warning!
>
> Brian
>
> ubuntu at ubuntu:~/crowbar$ ./dev setup
> Finding Github repos...
> First argument must be a file name!
> Creating your fork of Crowbar on Github.
> 2012-03-12 15:20:50 -0500: Could not fork dellcloudedge/crowbar!
>
>
>
> On Mon, Mar 12, 2012 at 3:15 PM, <Victor_Lowther at dell.com> wrote:
>
>> Intermittent 403 errors taking to Github are not unexpected, sadly
>> enough.  Rerunning ./dev setup should work.
>>
>> From: crowbar-bounces On Behalf Of Brian Parker
>> Sent: Monday, March 12, 2012 3:12 PM
>> To: crowbar
>> Subject: [Crowbar] "Dev Tool" working?
>>
>> Is the "dev tool" working for others?  I'm on Ubuntu 11.10. See below for
>> the error.
>>
>> Also, after failing in this way, it seems as though there is some state
>> to cleanup before attempting another run.  I can see that I might have to
>> delete the "personal" forks created by the script.
>>
>> Thanks,
>>
>> Brian
>>
>>
>> ubuntu at ubuntu:~/crowbar$ ./dev setup
>> Enter your Github username: farrez
>> Enter your Github password:
>> Enter your Github password again:
>> Finding Github repos...
>> Creating your fork of Crowbar on Github.
>> Creating a push URL for crowbar on Github
>> Adding remote for personal fork of crowbar on Github.
>> personal/HEAD set to master
>> Branch cf set up to track remote branch cf from origin.
>> Branch hadoop-os-build set up to track remote branch hadoop-os-build from
>> origin.
>> Branch modules set up to track remote branch modules from origin.
>> Branch openstack-os-build set up to track remote branch
>> openstack-os-build from origin.
>> Branch release/essex-hack/hadoop-os-build set up to track remote branch
>> release/essex-hack/hadoop-os-build from origin.
>> Branch release/essex-hack/master set up to track remote branch
>> release/essex-hack/master from origin.
>> Branch release/essex-hack/openstack-os-build set up to track remote
>> branch release/essex-hack/openstack-os-build from origin.
>> Branch release/fledermaus/master set up to track remote branch
>> release/fledermaus/master from origin.
>> Branch release/fledermaus/openstack-os-build set up to track remote
>> branch release/fledermaus/openstack-os-build from origin.
>> Branch ui set up to track remote branch ui from origin.
>> Branch v1.2.1-openstack set up to track remote branch v1.2.1-openstack
>> from origin.
>> Branch vlowther-barclamp-pkg-metadata set up to track remote branch
>> vlowther-barclamp-pkg-metadata from origin.
>> Branch vlowther-flattened-provisioner set up to track remote branch
>> vlowther-flattened-provisioner from origin.
>> Branch vlowther-ubuntu-bootif set up to track remote branch
>> vlowther-ubuntu-bootif from origin.
>> Already on 'release/fledermaus/master'
>> Submodule 'barclamps/crowbar' (
>> http://github.com/dellcloudedge/barclamp-crowbar.git) registered for
>> path 'barclamps/crowbar'
>> Cloning into barclamps/crowbar...
>> remote: Counting objects: 5658, done.
>> remote: Compressing objects: 100% (1983/1983), done.
>> remote: Total 5658 (delta 3133), reused 5625 (delta 3100)
>> Receiving objects: 100% (5658/5658), 20.43 MiB | 735 KiB/s, done.
>> Resolving deltas: 100% (3133/3133), done.
>> Submodule path 'barclamps/crowbar': checked out
>> '77a7b70a2583c1394cb1724e726682124f8bf03d'
>> fatal: ref HEAD is not a symbolic ref
>> Submodule 'barclamps/deployer' (
>> http://github.com/dellcloudedge/barclamp-deployer.git) registered for
>> path 'barclamps/deployer'
>> Cloning into barclamps/deployer...
>> remote: Counting objects: 6803, done.
>> remote: Compressing objects: 100% (2707/2707), done.
>> remote: Total 6803 (delta 3056), reused 6719 (delta 2972)
>> Receiving objects: 100% (6803/6803), 18.14 MiB | 875 KiB/s, done.
>> Resolving deltas: 100% (3056/3056), done.
>> Submodule path 'barclamps/deployer': checked out
>> '783c71fecde9552367e99b47cfc0667ae8c31edb'
>> fatal: ref HEAD is not a symbolic ref
>> Submodule 'barclamps/dns' (
>> http://github.com/dellcloudedge/barclamp-dns.git) registered for path
>> 'barclamps/dns'
>> Cloning into barclamps/dns...
>> remote: Counting objects: 262, done.
>> remote: Compressing objects: 100% (157/157), done.
>> remote: Total 262 (delta 92), reused 231 (delta 61)
>> Receiving objects: 100% (262/262), 34.43 KiB, done.
>> Resolving deltas: 100% (92/92), done.
>> Submodule path 'barclamps/dns': checked out
>> 'f182fb07c902f34b4d342ccd22afe5d4a4578f32'
>> fatal: ref HEAD is not a symbolic ref
>> Submodule 'barclamps/ganglia' (
>> http://github.com/dellcloudedge/barclamp-ganglia.git) registered for
>> path 'barclamps/ganglia'
>> Cloning into barclamps/ganglia...
>> remote: Counting objects: 250, done.
>> remote: Compressing objects: 100% (150/150), done.
>> remote: Total 250 (delta 96), reused 213 (delta 59)
>> Receiving objects: 100% (250/250), 37.08 KiB, done.
>> Resolving deltas: 100% (96/96), done.
>> Submodule path 'barclamps/ganglia': checked out
>> '68920feb8793933c49cd9b75316047e0b9a5c655'
>> fatal: ref HEAD is not a symbolic ref
>> Submodule 'barclamps/ipmi' (
>> http://github.com/dellcloudedge/barclamp-ipmi.git) registered for path
>> 'barclamps/ipmi'
>> Cloning into barclamps/ipmi...
>> remote: Counting objects: 205, done.
>> remote: Compressing objects: 100% (116/116), done.
>> remote: Total 205 (delta 77), reused 179 (delta 51)
>> Receiving objects: 100% (205/205), 25.08 KiB, done.
>> Resolving deltas: 100% (77/77), done.
>> Submodule path 'barclamps/ipmi': checked out
>> '59a7869332a2343757e8cf6eacc7c7f8265fbd57'
>> fatal: ref HEAD is not a symbolic ref
>> Submodule 'barclamps/logging' (
>> http://github.com/dellcloudedge/barclamp-logging.git) registered for
>> path 'barclamps/logging'
>> Cloning into barclamps/logging...
>> remote: Counting objects: 175, done.
>> remote: Compressing objects: 100% (102/102), done.
>> remote: Total 175 (delta 61), reused 157 (delta 43)
>> Receiving objects: 100% (175/175), 23.56 KiB, done.
>> Resolving deltas: 100% (61/61), done.
>> Submodule path 'barclamps/logging': checked out
>> '93c9df613e07ecc3f024f572e60fae2b7fe9b7e8'
>> fatal: ref HEAD is not a symbolic ref
>> Submodule 'barclamps/nagios' (
>> http://github.com/dellcloudedge/barclamp-nagios.git) registered for path
>> 'barclamps/nagios'
>> Cloning into barclamps/nagios...
>> remote: Counting objects: 621, done.
>> remote: Compressing objects: 100% (284/284), done.
>> remote: Total 621 (delta 264), reused 599 (delta 244)
>> Receiving objects: 100% (621/621), 646.75 KiB, done.
>> Resolving deltas: 100% (264/264), done.
>> Submodule path 'barclamps/nagios': checked out
>> 'bf941baa506379dbaab9ffe6ee1ae1c250bf4c5d'
>> fatal: ref HEAD is not a symbolic ref
>> Submodule 'barclamps/network' (
>> http://github.com/dellcloudedge/barclamp-network.git) registered for
>> path 'barclamps/network'
>> Cloning into barclamps/network...
>> remote: Counting objects: 677, done.
>> remote: Compressing objects: 100% (337/337), done.
>> remote: Total 677 (delta 203), reused 664 (delta 190)
>> Receiving objects: 100% (677/677), 8.64 MiB | 568 KiB/s, done.
>> Resolving deltas: 100% (203/203), done.
>> Submodule path 'barclamps/network': checked out
>> '573d584a4a17734927339495b07d338927584727'
>> fatal: ref HEAD is not a symbolic ref
>> Submodule 'barclamps/ntp' (
>> http://github.com/dellcloudedge/barclamp-ntp.git) registered for path
>> 'barclamps/ntp'
>> Cloning into barclamps/ntp...
>> remote: Counting objects: 156, done.
>> remote: Compressing objects: 100% (84/84), done.
>> remote: Total 156 (delta 48), reused 146 (delta 38)
>> Receiving objects: 100% (156/156), 22.73 KiB | 15 KiB/s, done.
>> Resolving deltas: 100% (48/48), done.
>> Submodule path 'barclamps/ntp': checked out
>> '8aa70d7215726f66e971506e59293deb7ad0255d'
>> fatal: ref HEAD is not a symbolic ref
>> Submodule 'barclamps/provisioner' (
>> http://github.com/dellcloudedge/barclamp-provisioner.git) registered for
>> path 'barclamps/provisioner'
>> Cloning into barclamps/provisioner...
>> remote: Counting objects: 1328, done.
>> remote: Compressing objects: 100% (677/677), done.
>> remote: Total 1328 (delta 604), reused 1225 (delta 501)
>> Receiving objects: 100% (1328/1328), 1.18 MiB | 376 KiB/s, done.
>> Resolving deltas: 100% (604/604), done.
>> Submodule path 'barclamps/provisioner': checked out
>> 'ebe54f389ba659667f5008892b0695995d0952a5'
>> fatal: ref HEAD is not a symbolic ref
>> Submodule 'barclamps/redhat-install' (
>> http://github.com/dellcloudedge/barclamp-redhat-install.git) registered
>> for path 'barclamps/redhat-install'
>> Cloning into barclamps/redhat-install...
>> remote: Counting objects: 481, done.
>> remote: Compressing objects: 100% (283/283), done.
>> remote: Total 481 (delta 168), reused 411 (delta 98)
>> Receiving objects: 100% (481/481), 53.01 KiB, done.
>> Resolving deltas: 100% (168/168), done.
>> Submodule path 'barclamps/redhat-install': checked out
>> '80bed0731ac0e961c3a19fbfcff55e26c14ba2cb'
>> fatal: ref HEAD is not a symbolic ref
>> Submodule 'barclamps/test' (
>> http://github.com/dellcloudedge/barclamp-test.git) registered for path
>> 'barclamps/test'
>> Cloning into barclamps/test...
>> remote: Counting objects: 108, done.
>> remote: Compressing objects: 100% (64/64), done.
>> remote: Total 108 (delta 40), reused 99 (delta 31)
>> Receiving objects: 100% (108/108), 17.84 KiB, done.
>> Resolving deltas: 100% (40/40), done.
>> Submodule path 'barclamps/test': checked out
>> 'e9846f042daf328386bf955d34b927bb3098cfab'
>> fatal: ref HEAD is not a symbolic ref
>> Submodule 'barclamps/ubuntu-install' (
>> http://github.com/dellcloudedge/barclamp-ubuntu-install.git) registered
>> for path 'barclamps/ubuntu-install'
>> Cloning into barclamps/ubuntu-install...
>> remote: Counting objects: 371, done.
>> remote: Compressing objects: 100% (256/256), done.
>> remote: Total 371 (delta 124), reused 312 (delta 65)
>> Receiving objects: 100% (371/371), 58.43 KiB | 102 KiB/s, done.
>> Resolving deltas: 100% (124/124), done.
>> Submodule path 'barclamps/ubuntu-install': checked out
>> 'afa9bd1db69de33d326591b7f42896b454a9c41b'
>> fatal: ref HEAD is not a symbolic ref
>> Already on 'release/fledermaus/master'
>> Branch andi-node-alloc-change set up to track remote branch
>> andi-node-alloc-change from origin.
>> Branch perf-imp set up to track remote branch perf-imp from origin.
>> Branch release/essex-hack/master set up to track remote branch
>> release/essex-hack/master from origin.
>> Branch rob-bc-import set up to track remote branch rob-bc-import from
>> origin.
>> Branch v1.2-openstack set up to track remote branch v1.2-openstack from
>> origin.
>> Branch v1.2.1-openstack set up to track remote branch v1.2.1-openstack
>> from origin.
>> error: Not a valid ref: refs/remotes/personal/master
>> personal/HEAD set to master
>> Branch release/essex-hack/master set up to track remote branch
>> release/essex-hack/master from origin.
>> Branch vlowther-barclamp-pkg-metadata set up to track remote branch
>> vlowther-barclamp-pkg-metadata from origin.
>> Branch vlowther-gemrc-hotfix set up to track remote branch
>> vlowther-gemrc-hotfix from origin.
>> error: Not a valid ref: refs/remotes/personal/master
>> personal/HEAD set to master
>> Branch release/essex-hack/master set up to track remote branch
>> release/essex-hack/master from origin.
>> error: Multiple remote HEAD branches. Please choose one explicitly with:
>>  git remote set-head personal master
>>  git remote set-head personal release/essex-hack/master
>> Branch release/essex-hack/master set up to track remote branch
>> release/essex-hack/master from origin.
>> error: Not a valid ref: refs/remotes/personal/master
>> personal/HEAD set to master
>> Branch release/essex-hack/master set up to track remote branch
>> release/essex-hack/master from origin.
>> error: Multiple remote HEAD branches. Please choose one explicitly with:
>>  git remote set-head personal master
>>  git remote set-head personal release/essex-hack/master
>> Branch release/essex-hack/master set up to track remote branch
>> release/essex-hack/master from origin.
>> error: The requested URL returned error: 403 while accessing
>> https://farrez:higuy@github.com/farrez/barclamp-logging/info/refs
>>
>> fatal: HTTP request failed
>> 2012-03-12 14:59:18 -0500: Cannot fetch repository info for your fork of
>> barclamp-logging.
>> ubuntu at ubuntu:~/crowbar$
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/crowbar/attachments/20120312/252570a6/attachment-0001.html