[Crowbar] Adding an extra network

[Kris_Applegate at Dell.com]

Just to double-check, in Crowbar, is the name of your network proposal "default"? Does the barclamp in the UI reflect your changes?


Kris Applegate

-----Original Message-----
From: crowbar-bounces On Behalf Of Kimball Johnson
Sent: Monday, March 12, 2012 9:48 AM
To: crowbar
Subject: [Crowbar] Adding an extra network

Hi, I'm trying to add an extra network, I have already installed the admin node and don't want to have to reinstall it if I can avoid it.

I have run 'knife data bag edit crowbar bc-template-network'  and added:

          "netapp": {
            "netmask": "255.255.255.0",
            "add_bridge": false,
            "broadcast": "172.16.36.255",
            "ranges": {
              "host": {
                "end": "172.16.36.239",
                "start": "172.16.36.20"
              }
            },
            "vlan": 104,
            "subnet": "172.16.36.0",
            "use_vlan": false,
            "conduit": "intf1"
          },

into the networks list

I then tried to allocate a IP to the node with:

 /opt/dell/bin/crowbar network allocate_ip default d00-26-55-d3-3e-1c.m2.infra.local netapp host

but I get:

Failed to edit: default : Not Found


What am I doing wrong?

Thanks

_______________________________________________
Crowbar mailing list
Crowbar at dell.com
https://lists.us.dell.com/mailman/listinfo/crowbar
For more information: https://github.com/dellcloudedge/crowbar/wiki