[Crowbar] Fred Network Configuration

Daniel Parker dcparker88 at gmail.com
Mon Jul 30 06:37:13 CDT 2012


Awesome, I was wondering about that - I will check that out.

Thanks!

On 7/30/2012 6:31 AM, Surya_Prabhakar at Dell.com wrote:
> How about toggling the network cables? eth0 for private and eth1 for 
> external and connect eth1 once crowbar is fully setup?
>
> surya.
>
> -----Original Message-----
> *From: *Daniel Parker [dcparker88 at gmail.com <mailto:dcparker88 at gmail.com>]
> *Sent: *Monday, July 30, 2012 06:27 AM Central Standard Time
> *To: *crowbar
> *Subject: *[Crowbar] Fred Network Configuration
>
> Hey all,
>
> I am working on installing the admin node on a Dell C6100 with two 
> NICs per sled - eth0 for external communication and eth1 for private 
> (will be used for other nodes.) Eth0 will be a 10.x.x.x network and 
> eth1 is 192.x.x.x.
>
> Last time this was done, Crowbar defaulted to eth0 as the 'private' 
> network and became the authoritative DNS server, thus taking down all 
> remote access to other servers in our lab. My question is - is there a 
> way to specify which network crowbar should monitor with DNS and which 
> network is for remote connection only?
>
> The real problem I am trying to solve is how to access the Crowbar 
> admin interface remotely.
>
> PS - I do have DRACs configured for each sled. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/crowbar/attachments/20120730/432e2d8c/attachment.html 


More information about the Crowbar mailing list