[Crowbar] No Root filesystem found

Tim Leong tjleong at gmail.com
Thu Jul 26 14:59:30 CDT 2012


I have since changed the raid controller to 1 disk only.  /proc/partitions
shows:  http://imgur.com/X4jYL



On Thu, Jul 26, 2012 at 2:57 PM, <Randy_Perryman at dell.com> wrote:

> Hi,****
>
> ** **
>
> Looking at what you set up, I see the RAID Controller reporting 6 Virtual
> Disks.  Did you configure one as the Primary Boot Volume in the RAID
> Controller BIOS?  ****
>
> ** **
>
> -Randy Perryman****
>
> ** **
>
> *From:* crowbar-bounces *On Behalf Of *Prabhakar, Surya
> *Sent:* Thursday, July 26, 2012 2:46 PM
> *To:* tjleong at gmail.com; Pittaro, Michael
>
> *Cc:* crowbar
> *Subject:* Re: [Crowbar] No Root filesystem found****
>
> ** **
>
> can you do ctrl+alt+f2. access the terminal and get the output of
> /proc/partitions.
>
> surya.
>
> -----Original Message-----
> *From: *Tim Leong [tjleong at gmail.com]
> *Sent: *Thursday, July 26, 2012 07:50 AM Central Standard Time
> *To: *Pittaro, Michael
> *Cc: *crowbar
> *Subject: *Re: [Crowbar] No Root filesystem found
>
> Was not replying to all... Oops.  Here is my reply:****
>
> ** **
>
> Here is the sequence of events...****
>
> ** **
>
> **1.     **Power on server****
>
> **2.     **Server PXE boots****
>
> **3.     **Registers with the admin node****
>
> **4.     **I allocate the node.  I don't do anything but put in a name
> and a description.  No RAID config.****
>
> **5.     **The node continues loading some stuff then reboots. ****
>
> **6.     **It PXE boots again.  ****
>
> **7.     **After it loads the system utilities, it bombs out with this
> error:  http://i.imgur.com/sOpkT.jpg****
>
> I've also recorded a screencast of this failure from the first PXE boot
> through.  You can see it here:  http://www.youtube.com/watch?v=hhQMUUgZc0U
> ****
>
> ** **
>
> On Tue, Jul 24, 2012 at 1:02 PM, <Michael_Pittaro at dell.com> wrote:****
>
> Tim,
>
> The normal flow shuld be an initial PXE boot of a CentOS image
> ('sledgehammer), at which point the node should wait to be be allocated
> before continuing.
>
> Are the nodes being discovered by Crowbar, and the errors occur after
> allocation , or do the errors occur before the node is discovered?
>
> mike
>
>
>
>
> ****
>
> ** **
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.us.dell.com/pipermail/crowbar/attachments/20120726/8459205d/attachment-0001.html 


More information about the Crowbar mailing list